X-ray tomography data of compression tested unidirectional fibre composites with different off-axis angles

D. Wilhelmsson; Lars Pilgaard Mikkelsen; Søren Fæster; L. E. Asp

doi:10.1016/j.dib.2019.104263

X-ray tomography data of compression tested unidirectional fibre composites with different off-axis angles

D. Wilhelmsson, Lars Pilgaard Mikkelsen, Søren Fæster, L. E. Asp

Research output: Contribution to journal › Journal article › Research › peer-review

195 Downloads (Pure)

Abstract

This data article contains lab-based micro-computed tomography (μCT) data of unidirectional (UD) non-crimp fabric (NCF) carbon fibre reinforced composite specimens that have been deformed by compression. The specimens contain UD fibres with off-axis angles of 0°, 5°, 10°, 15° and 20° and the compression testing induces kink-band formation. This data formed the basis for the analysis of the influence of in-plane shear on kink-plane orientation as reported in Wilhelmsson et al. (Wilhelmsson et al., 2019).

Original language	English
Article number	104263
Journal	Data in Brief
Volume	25
Number of pages	8
ISSN	2352-3409
DOIs	https://doi.org/10.1016/j.dib.2019.104263
Publication status	Published - 2019

Access to Document

10.1016/j.dib.2019.104263

PostprintAccepted author manuscript, 1.11 MB
1 s2Final published version, 3.11 MBLicence: CC BY-NC-ND

1 Active

MicroLab at DTU Wind Energy
Mikkelsen, L. P., Fæster, S., Vogeley, E. & Sørensen, B. F.
01/01/2021 → …
Project: Research

Cite this

@article{b6694fabe8954229adb77153598b0445,

title = "X-ray tomography data of compression tested unidirectional fibre composites with different off-axis angles",

abstract = "This data article contains lab-based micro-computed tomography (μCT) data of unidirectional (UD) non-crimp fabric (NCF) carbon fibre reinforced composite specimens that have been deformed by compression. The specimens contain UD fibres with off-axis angles of 0°, 5°, 10°, 15° and 20° and the compression testing induces kink-band formation. This data formed the basis for the analysis of the influence of in-plane shear on kink-plane orientation as reported in Wilhelmsson et al. (Wilhelmsson et al., 2019).",

author = "D. Wilhelmsson and Mikkelsen, {Lars Pilgaard} and S{\o}ren F{\ae}ster and Asp, {L. E.}",

year = "2019",

doi = "10.1016/j.dib.2019.104263",

language = "English",

volume = "25",

journal = "Data in Brief",

issn = "2352-3409",

publisher = "Elsevier",

}

TY - JOUR

T1 - X-ray tomography data of compression tested unidirectional fibre composites with different off-axis angles

AU - Wilhelmsson, D.

AU - Mikkelsen, Lars Pilgaard

AU - Fæster, Søren

AU - Asp, L. E.

PY - 2019

Y1 - 2019

N2 - This data article contains lab-based micro-computed tomography (μCT) data of unidirectional (UD) non-crimp fabric (NCF) carbon fibre reinforced composite specimens that have been deformed by compression. The specimens contain UD fibres with off-axis angles of 0°, 5°, 10°, 15° and 20° and the compression testing induces kink-band formation. This data formed the basis for the analysis of the influence of in-plane shear on kink-plane orientation as reported in Wilhelmsson et al. (Wilhelmsson et al., 2019).

AB - This data article contains lab-based micro-computed tomography (μCT) data of unidirectional (UD) non-crimp fabric (NCF) carbon fibre reinforced composite specimens that have been deformed by compression. The specimens contain UD fibres with off-axis angles of 0°, 5°, 10°, 15° and 20° and the compression testing induces kink-band formation. This data formed the basis for the analysis of the influence of in-plane shear on kink-plane orientation as reported in Wilhelmsson et al. (Wilhelmsson et al., 2019).

U2 - 10.1016/j.dib.2019.104263

DO - 10.1016/j.dib.2019.104263

M3 - Journal article

C2 - 31384650

VL - 25

JO - Data in Brief

JF - Data in Brief

SN - 2352-3409

M1 - 104263

ER -

X-ray tomography data of compression tested unidirectional fibre composites with different off-axis angles

Abstract

Access to Document

Fingerprint

Projects

MicroLab at DTU Wind Energy

Cite this