Wind turbine aerodynamic measurements using a scanning lidar

Research output: Contribution to journalConference article – Annual report year: 2018Researchpeer-review

Documents

DOI

View graph of relations

A method for measuring wake and aerodynamic properties of a wind turbine with reduced error based on simulated lidar measurements is proposed. A scanning lidar measures air velocity scalar projected onto its line of sight. However, line of sight is rarely parallel to the velocities of interest. The line of sight projection correction technique showed reduced axial velocity error for a simple wake model. Next, an analysis based on large-eddy simulations of a 27 m diameter wind turbine was used to more accurately assess the projection correction technique in a turbulent wake. During the simulation, flow behind the turbine is sampled with a nacelle mounted virtual lidar matching the scanning trajectory and sampling frequency of the DTU SpinnerLidar. The axial velocity, axial induction, freestream wind speed, thrust coefficient, and power coefficient are calculated from virtual lidar measurements using two different estimates of the flow: line of sight velocity without correction, and line of sight with projection correction. The flow field is assumed to be constant during one complete scan of the lidar field of view, and the average wind direction is assumed to be equal to the instantaneous wind direction at the lidar measurement location for the projection correction. Despite these assumptions, results indicate that all wake and aerodynamic quantity error is reduced significantly by using the projection correction technique; axial velocity error is reduced on average from 7.4% to 2.8%.
Original languageEnglish
Article number052014
Book seriesJournal of Physics: Conference Series
Volume1037
Issue number5
Number of pages10
ISSN1742-6596
DOIs
Publication statusPublished - 2018
EventThe Science of Making Torque from Wind 2018 - Politecnico di Milano (POLIMI), Milan, Italy
Duration: 20 Jun 201822 Jun 2018
Conference number: 7
http://www.torque2018.org/

Conference

ConferenceThe Science of Making Torque from Wind 2018
Number7
LocationPolitecnico di Milano (POLIMI)
CountryItaly
CityMilan
Period20/06/201822/06/2018
Internet address

Bibliographical note

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

CitationsWeb of Science® Times Cited: No match on DOI
Download as:
Download as PDF
Select render style:
APAAuthorCBE/CSEHarvardMLAStandardVancouverShortLong
PDF
Download as HTML
Select render style:
APAAuthorCBE/CSEHarvardMLAStandardVancouverShortLong
HTML
Download as Word
Select render style:
APAAuthorCBE/CSEHarvardMLAStandardVancouverShortLong
Word

Download statistics

No data available

ID: 149580813