W-band waveguide bandpass filter with E-plane cut

Vedran Furtula, Mirko Salewski

Research output: Contribution to journalJournal articleResearchpeer-review

603 Downloads (Pure)

Abstract

In this paper, we present a design and measurements of a five-section bandpass filter with a passband from 96 to 106 GHz. The insertion loss is less than 1.4 dB in the passband, and the rejection is better than 40 dB in the range from 115 to 142 GHz. We use transmission line coupling theory based on
Tchebyscheff’s synthesis in order to provide an initial guess for the geometrical parameters of the filter such as cavity lengths and coupling widths. The filter is manufactured from brass in two halves in the E-plane cut topology. The S-parameters of the filter are measured and compared with the simulations.
The measured passband insertion loss is approximately 0.4 dB worse than in the simulation, and the measured passband width is approximately 3.4% narrower. The measured filter attenuation roll-off corresponds well to the simulation. We also compare our S-parameter measurements of the E-plane filter with corresponding measurements of a very similar H-plane filter. The transmission and reflection characteristics of the E-plane filter are better than those of the H-plane filter.
Original languageEnglish
JournalReview of Scientific Instruments
Volume85
Issue number7
Pages (from-to)074703
ISSN0034-6748
Publication statusPublished - 2014

Bibliographical note

© 2014 AIP Publishing LLC

Cite this