Verification of load measurements, preliminary Ver.

Andrea Vignaroli*, Allan Vesth*

*Corresponding author for this work

Research output: Book/ReportReportResearch


This report documents DTU’s verification of a client load measurement system including calibrations installed on a given turbine at DTU test facility in Denmark. The load measurements will be carried out in a period and verification of measured loads from this period is not included in this report. The client is responsible for the measurement system and have documented this including calibrations in a number of reports, see section 3. The verification is carried out in accordance to internal procedure which is a part of DTU Wind accredited quality system. The verification consist of a control of a chosen number of sensors and calibrations. DTU is as an accredited test laboratory with this report verifying that the client is carrying out the load measurements in accordance to Ref. [1].
Original languageEnglish
Place of PublicationRisø, Roskilde, Denmark
PublisherDTU Wind Energy
Number of pages17
Publication statusPublished - 2021
SeriesDTU Wind Energy WTT I

Bibliographical note

This is an internal report and therefore not available in full text. Please contact author's or director of author's department for further information.


Dive into the research topics of 'Verification of load measurements, preliminary Ver.'. Together they form a unique fingerprint.

Cite this