Verification of load measurement system and calibrations

Carsten Weber Kock, Allan Vesth

Research output: Book/ReportReport

Abstract

This report documents DTU’s verification of a client load measurement system including calibrations installed on a given turbine at DTU test facility in Denmark. The load measurements will be carried out in a period and verification of measured loads from this period is not included in this report. The client is responsible for the measurement system and have documented this including calibrations in a number of reports, see section 3. The verification is carried out in accordance to internal procedure which is a part of DTU Wind accredited quality system. The verification consist of a control of a chosen number of sensors and calibrations. DTU is as an accredited test laboratory with this report verifying that the client is carrying out the load measurements in accordance to Ref. [1].
Original languageEnglish
PublisherDTU Wind Energy
Number of pages23
Publication statusPublished - 2019
SeriesDTU Wind Energy I
NumberWTT I-1266

Bibliographical note

This is an internal report and therefore not available in full text. Please contact author's or director of author's department for further information.

Keywords

  • WTT I-1266

Cite this

Kock, C. W., & Vesth, A. (2019). Verification of load measurement system and calibrations. DTU Wind Energy. DTU Wind Energy I, No. WTT I-1266