Ultra-thin Cu2ZnSnS4 solar cell by pulsed laser deposition

Research output: Contribution to journalJournal article – Annual report year: 2017Researchpeer-review

View graph of relations

We report on the fabrication of a 5.2% efficiency Cu2ZnSnS4 (CZTS) solar cell made by pulsed laser deposition (PLD) featuring an ultra-thin absorber layer (less than 450 nm). Solutions to the issues of reproducibility and micro-particulate ejection often encountered with PLD are proposed. At the optimal laser fluence, amorphous CZTS precursors with optimal stoichiometry for solar cells are deposited from a single target. Such precursors do not result in detectable segregation of secondary phases after the subsequent annealing step. In the analysis of the solar cell device, we focus on the effects of the finite thickness of the absorber layer. Depletion region width, carrier diffusion length, and optical losses due to incomplete light absorption and back contact reflection are quantified. We conclude that material- and junction quality is comparable to that of thicker state-of-the-art CZTS devices, even though the efficiency is lower due to optical losses.
Original languageEnglish
JournalSolar Energy Materials & Solar Cells
Volume166
Pages (from-to)91–99
ISSN0927-0248
DOIs
Publication statusPublished - 2017
CitationsWeb of Science® Times Cited: No match on DOI

    Research areas

  • CZTS, Cu2ZnSnS4, Kesterite, Pulsed laser deposition, Ultra-thin

Download statistics

No data available

ID: 131441604