Traceability of optical length measurements on sand surfaces

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedings – Annual report year: 2016Researchpeer-review

View graph of relations

This work concerns traceable measurements on moulds used in automatic casting lines made of green sand, which has a very low strength against the force of a contact probe. A metrological set-up was made based on the use of calibrated workpieces following ISO 15530-3 to determine the uncertainty of optical measurements on a sand surface. A new customised sand sample was developed using a hard binder to withstand the contact force of a touch probe, while keeping optical cooperativeness similar to that of green sand. The length of the sample was calibrated using a dial gauge set-up. An optical 3D scanner with fringe pattern projection was used to measure the length of a green sand sample (soft sample) with traceability transfer through the hard sample. Results confirm that the uncertainty of the optical scanner on the substituted hard sample is similar to that of the soft sample, so the hard sample can successfully represent the soft sample in the ISO 15530-3 procedure. The expanded uncertainty (k=2) of length measurements on sand was estimated to 10 µm.
Original languageEnglish
Title of host publicationProceedings of euspen’s 16th International Conference & Exhibition
Number of pages2
Publication date2016
Publication statusPublished - 2016
Eventeuspen’s 16th International Conference & Exhibition - East Midlands Conference Centre, Nottingham, United Kingdom
Duration: 30 May 20163 Jun 2016

Conference

Conferenceeuspen’s 16th International Conference & Exhibition
LocationEast Midlands Conference Centre
CountryUnited Kingdom
CityNottingham
Period30/05/201603/06/2016

    Research areas

  • Metrology, Traceability, Optical 3D scanning, Sand

ID: 123573759