Thermally crosslinked sulfonated polybenzimidazole membranes and their performance in high temperature polymer electrolyte fuel cells

Research output: Contribution to journalJournal article – Annual report year: 2019Researchpeer-review

View graph of relations

The degradation pathway of phosphoric acid doped polybenzimidazole membranes in high temperature polymer electrolyte membrane fuel cells depends on the acid contents. If it is high, creep is discussed as the main reason. If it is low (membranes prepared by solvent evaporation and post-doping), the main cause may be loss of acid due to evaporation. The net transport of acid to the anode side at high current densities should also lead to local softening of the membrane, which could be mitigated by crosslinking the membrane. Here we show that sulfonated para-polybenzimidazole membranes can be stabilized by curing at 350 °C. In contrast to meta-polybenzimidazole and sulfonated para-polybenzimidazole, crosslinked sulfonated para-polybenzimidazole is insoluble in dimethylacetamide at room temperature and phosphoric acid at 160 °C. At 160 °C and 5% relative humidity the conductivity of crosslinked sulfonated para-polybenzimidazole and meta-polybenzimidazole is 214 mS cm−1 and 147 mS cm−1, respectively. At 600 mA cm− 2, the voltage decay rate is 16 μV h−1, much lower than published for commercial meta-polybenzimidazole (308 μV h−1). Furthermore, the average voltage at 600 mA cm− 2 is 523 mV, while a previously published cured meta-polybenzimidazole membrane only reaches 475 mV.
Original languageEnglish
Article number117218
JournalJournal of Membrane Science
Volume588
Number of pages8
ISSN0376-7388
DOIs
Publication statusPublished - 2019
CitationsWeb of Science® Times Cited: No match on DOI

    Research areas

  • High temperature polymer electrolyte fuel cell, (HT PEMFC), Sulfonated polybenzimidazole, Thermal crosslinking, Stability, High current density

ID: 185525285