Thermal distortion of disc-shaped ductile iron castings in vertically parted moulds

Research output: Contribution to journalJournal article – Annual report year: 2015Researchpeer-review

View graph of relations

A disc-shaped casting with an inner boss and an outer rim, separated by a thin walled section, was examined. This measurable deformation varied with the feeding modulus. The influence of alloy composition, particularly Si content, was examined with a pearlitic ductile iron (EN-GJS-500-7) and a fully ferritic ductile iron (EN-GJS-450-10). The experiment showed that both the alloy composition and choice of feeder influenced the degreeof deformation measured in the finished casting. It was found that the deformation of the pearlitic alloy was influenced controllably by changing the feeder modulus, whereas the deformation of the fully ferritic alloy was less affected by a change in thermal gradient. Both alloys underwent comparable deformations with respect to size, shape, and location.© 2014 Elsevier B.V. All rights reserved
Original languageEnglish
JournalJournal of Materials Processing Technology
Volume217
Pages (from-to)262-271
ISSN0924-0136
DOIs
Publication statusPublished - 2015
CitationsWeb of Science® Times Cited: No match on DOI

    Research areas

  • Dimensional accuracy, SG iron, Feeder and riser, Machining allowance, SI content, Thermal gradient

ID: 103260288