The influence of twine thickness, twine number and netting orientation on codend selectivity

Bent Herrmann, Harald Wienbeck, Waldemar Moderhak, Daniel Stepputtis, Ludvig Ahm Krag

Research output: Contribution to journalJournal articleResearchpeer-review

Abstract

Based on an experimental Baltic trawl fishery, we tested diamond mesh codends with different twine thicknesses, twine numbers (single or double), and netting orientation (T0 or T90) to quantify the effects of the twine characteristics on the size selection of cod (Gadus morhua) and plaice (Pleuronectes platessa). For a given twine thickness: going from T0 to T90 increases selectivity of cod; while going from single to double reduce it. Increasing twine thickness reduces selection but the extent depends on whether the twine is single or double and whether the netting orientation is T0 or T90. In general, the results demonstrate the benefit of using a relatively thin single twine netting to ensure the appropriate size selection with round fish and the best results were obtained using netting with a T90 orientation. For a given twine thickness going from T0 to T90 decreases selectivity of plaice. Increasing twine thickness reduces selection for plaice. Our results demonstrate that very different selectivity results can be obtained using the same mesh size, simply by varying the twine thickness, the twine number, and the netting orientation. In some fisheries, the size selectivity could be improved considerably by adjusting these simple design parameters alternatively to produce more advanced and complex designs.
Original languageEnglish
JournalFisheries Research
Volume145
Pages (from-to)22-36
ISSN0165-7836
DOIs
Publication statusPublished - 2013

Keywords

  • Cod
  • Codend selectivity
  • Diamond mesh
  • Plaice
  • SELNET
  • Size selectivity
  • T0
  • T90
  • Twine thickness
  • Twine number

Cite this