The Cutting Process, Chips and Cutting Forces in Machining CFRP

A. Koplev; Aage Lystrup; T. Vorm

doi:10.1016/0010-4361(83)90157-X

The Cutting Process, Chips and Cutting Forces in Machining CFRP

A. Koplev, Aage Lystrup, T. Vorm

Research output: Contribution to journal › Journal article › Research › peer-review

Abstract

The cutting of unidirectional CFRP, perpendicular as well as parallel to the fibre orientation, is examined. Shaping experiments, ‘quick-stop’ experiments, and a new chip preparation technique are used for the investigation. The formation of the chips, and the quality of the machined surface is discussed. The cutting forces parallel and perpendicular to the cutting direction are measured for various parameters, and the results correlated to the formation of chips and the wear of the tool.

Original language	English
Journal	Composites
Volume	14
Issue number	4
Pages (from-to)	371-376
ISSN	0010-4361
DOIs	https://doi.org/10.1016/0010-4361(83)90157-X
Publication status	Published - 1983

Keywords

composite materials
macrochips
cutting mechanism
cutting techniques
machining

Access to Document

10.1016/0010-4361(83)90157-X

OpenUrl availability

Full text

Cite this

@article{492dae6c920d4aa2a9f2f73b8f75bca7,

title = "The Cutting Process, Chips and Cutting Forces in Machining CFRP",

abstract = "The cutting of unidirectional CFRP, perpendicular as well as parallel to the fibre orientation, is examined. Shaping experiments, {\textquoteleft}quick-stop{\textquoteright} experiments, and a new chip preparation technique are used for the investigation. The formation of the chips, and the quality of the machined surface is discussed. The cutting forces parallel and perpendicular to the cutting direction are measured for various parameters, and the results correlated to the formation of chips and the wear of the tool.",

keywords = "composite materials, macrochips, cutting mechanism, cutting techniques, machining",

author = "A. Koplev and Aage Lystrup and T. Vorm",

year = "1983",

doi = "10.1016/0010-4361(83)90157-X",

language = "English",

volume = "14",

pages = "371--376",

journal = "Composites",

issn = "0010-4361",

number = "4",

}

TY - JOUR

T1 - The Cutting Process, Chips and Cutting Forces in Machining CFRP

AU - Koplev, A.

AU - Lystrup, Aage

AU - Vorm, T.

PY - 1983

Y1 - 1983

N2 - The cutting of unidirectional CFRP, perpendicular as well as parallel to the fibre orientation, is examined. Shaping experiments, ‘quick-stop’ experiments, and a new chip preparation technique are used for the investigation. The formation of the chips, and the quality of the machined surface is discussed. The cutting forces parallel and perpendicular to the cutting direction are measured for various parameters, and the results correlated to the formation of chips and the wear of the tool.

AB - The cutting of unidirectional CFRP, perpendicular as well as parallel to the fibre orientation, is examined. Shaping experiments, ‘quick-stop’ experiments, and a new chip preparation technique are used for the investigation. The formation of the chips, and the quality of the machined surface is discussed. The cutting forces parallel and perpendicular to the cutting direction are measured for various parameters, and the results correlated to the formation of chips and the wear of the tool.

KW - composite materials

KW - macrochips

KW - cutting mechanism

KW - cutting techniques

KW - machining

U2 - 10.1016/0010-4361(83)90157-X

DO - 10.1016/0010-4361(83)90157-X

M3 - Journal article

SN - 0010-4361

VL - 14

SP - 371

EP - 376

JO - Composites

JF - Composites

IS - 4

ER -

The Cutting Process, Chips and Cutting Forces in Machining CFRP

Abstract

Keywords

Access to Document

OpenUrl availability

Fingerprint

Cite this