Test and Approval Center for Fuel Cell and Hydrogen Technologies: Phase I. Initiation: Final report

Anke Hagen (Editor)

Research output: Book/ReportReportResearch

1738 Downloads (Pure)


Fuel cells and hydrogen technologies hold the potential for decreasing emissions of greenhouse gases and air pollutants, for facilitating the increased use of renewable energy sources with high efficiencies and thereby contributing to the establishment of a sustainable energy system and the mitigation of the human-caused global warming. Fuel cells (in particular solid oxide fuel cells) produce electricity and heat at higher efficiencies than conventional power plants. They emit less pollutants - for example no toxic NOx at all - than conventional plants do. Fuel cells can operate on fossil fuels (natural gas) and on alternative fuels as well. They can therefore bridge the gap between availability and efficient use of fossil fuels on the short term and establishment of an energy market based on renewables on the long term. Hydrogen is a zero carbon energy carrier that– just like electricity - can be converted to power and heat. The increased use of hydrogen will decrease oil dependency, which is foreseen to have profound economic as well as political impacts.
Fuel cell and hydrogen technologies play an important role in future sustainable energy system scenarios, often in combination with other technologies where Denmark already holds strong positions today. This includes for example (1) using biomass for production of electricity, (2) storing of energy by using excess electricity from wind turbines to produce fuel by electrolysis and (3) using fuel cells for load balancing of the fluctuating wind energy. As the fuel cell and hydrogen technologies come closer to commercialization, development of testing methodology, qualified testing and demonstration become increasingly important. Danish industrial players have expressed a strong need for support in the process to push fuel cell and hydrogen technologies from the research and development stage into the commercial domain. A Center to support industry with test, development, analysis, approval, certification, consultation, and training in the areas of fuel cell and hydrogen technologies was needed. Denmark has demonstrated leading international positions in the fuel cell and hydrogen technologies. The expectations from the center were to secure a continuing strong position for Denmark in these fast developing areas in the near and far future. Furthermore, the center was considered necessary to secure that the substantial investments already spent on these technologies also lead to commercial success.
The project ‘Test and Approval Center for Fuel Cell and Hydrogen Technologies: Phase I. Initiation’ was aiming at starting with the Establishment of such a center. The following report documents the achievements within the project. This is done by compiling short reports for each milestone that illustrate the related activities. The official reports are included in this final report. Furthermore, an account for the dissemination of the project results and the Center as such is given and, finally, the final EUDP scheme for the project.
Original languageEnglish
PublisherDepartment of Energy Conversion and Storage, Technical University of Denmark
Number of pages162
Publication statusPublished - 2012

Bibliographical note

EUDP‐FCH Testcenter Fase 1, Journalnr.: 64009‐246

Fingerprint Dive into the research topics of 'Test and Approval Center for Fuel Cell and Hydrogen Technologies: Phase I. Initiation: Final report'. Together they form a unique fingerprint.

Cite this