SU-8 etching in inductively coupled oxygen plasma

Research output: Contribution to journalJournal article – Annual report year: 2013Researchpeer-review

View graph of relations

Structuring or removal of the epoxy based, photo sensitive polymer SU-8 by inductively coupled plasma reactive ion etching (ICP-RIE) was investigated as a function of plasma chemistry, bias power, temperature, and pressure. In a pure oxygen plasma, surface accumulation of antimony from the photo-initiator introduced severe roughness and reduced etch rate significantly. Addition of SF6 to the plasma chemistry reduced the antimony surface concentration with lower roughness and higher etch rate as an outcome. Furthermore the etch anisotropy could be tuned by controlling the bias power. Etch rates up to 800 nm min-1 could be achieved with low roughness and high anisotropy. © 2013 The Authors. Published by Elsevier B.V. All rights reserved.
Original languageEnglish
JournalMicroelectronic Engineering
Volume112
Pages (from-to)35-40
ISSN0167-9317
DOIs
Publication statusPublished - 2013

Bibliographical note

This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

CitationsWeb of Science® Times Cited: No match on DOI

    Research areas

  • Anisotropy, Antimony, Chemistry, Dry etching, Inductively coupled plasma, Oxygen, Sulfur hexafluoride, Surface roughness, ICP-RIE, SU-8, Roughness, SF6

Download statistics

No data available

ID: 56376540