Skip to main navigation Skip to search Skip to main content

Stored energy calculation in AA 1050 based on deformation microstructure from electron backscatter diffraction data

  • Kunming University of Science and Technology
  • Tsinghua University

Research output: Contribution to journal › Journal article › Research › peer-review

77 Downloads (Orbit)

Abstract

An AA1050 aluminum plate was cold rolled to a true strain of 1.9, and the stored energy was calculated based on microstructural parameters, namely the dislocation boundary spacing and the misorientation distribution, determined from large area electron back-scatter diffraction maps with an indexed fraction higher than 90% before any data cleaning operations. Three methods were used to determine the dislocation boundary spacing and the misorientation distribution. The results show significant differences in the dislocation boundary spacings and the misorientation distributions obtained by the different methods, especially for boundaries with misorientation angles below 2°. These deviations lead to significant differences in the calculated stored energy. A discussion of the three approaches to determine stored energies is presented.
Original languageEnglish
Article number012064
JournalIOP Conference Series: Materials Science and Engineering
Volume1249
Issue number1
Number of pages7
ISSN1757-8981
DOIs
Publication statusPublished - 2022
Event42nd Risø International Symposium on Materials Science - Risø, Denmark
Duration: 5 Sept 2022 → 9 Sept 2022
https://www.conferencemanager.dk/42ndsymposium/program

Conference

Conference42nd Risø International Symposium on Materials Science
Country/TerritoryDenmark
CityRisø
Period05/09/2022 → 09/09/2022
Internet address

Fingerprint

Dive into the research topics of 'Stored energy calculation in AA 1050 based on deformation microstructure from electron backscatter diffraction data'. Together they form a unique fingerprint.

Cite this