Sintering of Multilayered Porous Structures: Part II – Experiments and Model Applications

Research output: Contribution to journalJournal article – Annual report year: 2013Researchpeer-review

View graph of relations

Experimental analyses of shrinkage and distortion kinetics during sintering of bilayered porous and dense gadolinium-doped ceria Ce0.9Gd0.1O1.95d structures are carried out, and compared with the theoretical models developed in Part I of this work. A novel approach is developed for the determination of the shear viscosities ratio of the layer fully dense materials. This original technique enables the derivation of all the input parameters for the bilayer sintering modeling from one set of optical dilatometry measurements, including the conversion between real and specific times of sintering, the layers’ relative sintering intensity, and the shear viscosities ratio of the layer fully dense materials. These optical dilatometry measurements are conducted simultaneously for each individual layer and for a symmetric trilayered porous structure based on the two layers utilized in the bilayered system. The obtained modeling predictions indicate satisfactory agreement with the results of sintering of a bilayered cerium–gadolinium oxide system in terms of distortion and shrinkage kinetics.
Original languageEnglish
JournalJournal of the American Ceramic Society
Volume96
Issue number8
Pages (from-to)2666–2673
ISSN0002-7820
DOIs
Publication statusPublished - 2013
CitationsWeb of Science® Times Cited: No match on DOI

ID: 55054663