Simulation and Rapid Prototyping of Adaptive Control Systems using the Adaptive Blockset for Simulink

    Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

    Abstract

    The paper describes the design considerations and implementational aspects of the Adaptive Blockset for Simulink which has been developed in a prototype implementation. The concept behind the Adaptive Blockset for Simulink is to bridge the gap between simulation and prototype controller implementation. This is done using the code generation capabilities of Real Time Workshop in combination with C s-function blocks for adaptive control in Simulink. In the paper the design of each group of blocks normally found in adaptive controllers is outlined. The block types are, identification, controller design, controller and state variable filter.The use of the Adaptive Blockset is demonstrated using a simple laboratory setup. Both the use of the blockset for simulation and for rapid prototyping of a real-time controller are shown.
    Original languageEnglish
    Title of host publicationAdaptive Systems in Control and Signal Processing
    Publication date1998
    Publication statusPublished - 1998
    EventIFAC Workshop on Adaptive Control and Signal Processing - Glasgow, Scotland
    Duration: 1 Jan 1998 → …

    Conference

    ConferenceIFAC Workshop on Adaptive Control and Signal Processing
    CityGlasgow, Scotland
    Period01/01/1998 → …

    Cite this