Scalloped electrodes for highly sensitive electrical measurements

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedings – Annual report year: 2012Researchpeer-review

View graph of relations

In this work we introduce a novel out-of-plane electrode with pronounced scalloped surface and high aspect ratio for electrical recordings of brain tissue in vitro, with the aim to reduce significantly the impedance of the measuring system. The profile and height of the structures is tailored by means of silicon fabrication techniques that sharpen them progressively and in a controlled manner. We will show that the use of the scalloped area achieves a great decrease in impedance, which is very significant for a reduction of noise in electrical measurements. The measured impedance reflects an important improvement in comparison with already available systems. Additionally, first test of durability prove the robustness of these needle-like electrodes during indentation motions. In conclusion, the resulting electrodes are robust, sharp structures that decrease the typical impedance of microelectrodes and are potentially suited for indentation and recording of brain tissue.
Original languageEnglish
Title of host publicationProceedings of IEEE Sensors
Publication date2011
ISBN (Print)978-1-4244-9290-9
Publication statusPublished - 2011
Event2011 IEEE Sensors - Limerick, Iceland
Duration: 28 Oct 201131 Oct 2011


Conference2011 IEEE Sensors
Internet address
CitationsWeb of Science® Times Cited: No match on DOI

    Research areas

  • Impedance measurement, Impedance, Surface impedance, Materials, Electrodes, Brain, In vitro

ID: 6462537