Safety and function Test Report. Version 2

Research output: Book/ReportReportResearch

Abstract

The report describes Safety and function tests carried out on specific wind turbine.The turbine has been instrumented and reported for a load measurement according to IEC 61400-13. All loads (e.g. blade; tower and main shaft bending moments) measured and documented in this report are only calibrated by gravity loads. According to DTU Wind Energy’s quality manual all calibrations shall be traceable and independent, therefore this report does not comply with DTU Wind Energy’s quality manual and DTU Wind Energy’s interpretation of the IEC standard. The results of the measurements, described in this report, are only valid for the specific wind turbine.
Original languageEnglish
PublisherDTU Wind Energy
Number of pages156
Publication statusPublished - 2012
SeriesDTU Wind Energy WTT I
Number1011

Bibliographical note

This is an internal report and therefore not available in full text. Please contact author's or director of author's institute for further information.

Keywords

  • DTU Wind Energy WTT I-1011(EN)
  • WTT-I-1011
  • WTT-I-1011(EN)

Fingerprint

Dive into the research topics of 'Safety and function Test Report. Version 2'. Together they form a unique fingerprint.

Cite this