Review of the results of the COST MP0702 exercise on the sensitivity of metal-dielectric layered flat lens to fabrication inaccuracies

Tomasz Stefaniuk; Rafal Kotyński; Hovik Baghdasaryan; Anna Pastuszczak; Marian Marciniak; Andrei Lavrinenko; Krassimir Panajotov; Tomasz Szoplik

doi:10.1109/ICTON.2011.5970809

Review of the results of the COST MP0702 exercise on the sensitivity of metal-dielectric layered flat lens to fabrication inaccuracies

Tomasz Stefaniuk
, Rafal Kotyński
, Hovik Baghdasaryan
, Anna Pastuszczak
, Marian Marciniak
, Andrei Lavrinenko
, Krassimir Panajotov
, Tomasz Szoplik

University of Warsaw
National Institute of Telecommunications – the State Research Institute
Vrije Universiteit Brussel
National Polytechnic University of Armenia

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Abstract

We summarise the results of the COST MP0702 exercise on the sensitivity of metal-dielectric layered superlens to fabrication inaccuracies. The major results of this joint task have been already published in Ref. 1, Opto- Electronics Review, vol. 18(4), pp. 446-457, 2010. The numerical analysis of the superlens is based on the transfer matrix method, the finite-difference time-domain technique, and the method of single expression, and is compared with a simplified effective medium approach. The lens is designed for imaging with subwavelength resolution at wavelength of 441 nm. Its operation may be attributed to self-collimation with a secondary role of Fabry-Perot resonant transmission. We have estimated the resolution, transmission efficiency and sensitivity with respect to fabrication inaccuracies of this superlens. The tolerance analysis indicates that the resolution and transmission efficiency are highly sensitive to even small changes of layer thicknesses.

Original language	English
Title of host publication	2011 13th International Conference on Transparent Optical Networks (ICTON)
Publisher	IEEE
Publication date	2011
Pages	Mo.C2.6
ISBN (Print)	978-1-4577-0881-7
ISBN (Electronic)	978-1-4577-0880-0
DOIs	https://doi.org/10.1109/ICTON.2011.5970809
Publication status	Published - 2011
Event	13th International Conference on Transparent Optical Networks (ICTON) - Stockholm, Sweden Duration: 26 Jun 2011 → 30 Jun 2011

Conference

Conference	13th International Conference on Transparent Optical Networks (ICTON)
Country/Territory	Sweden
City	Stockholm
Period	26/06/2011 → 30/06/2011

Series	International Conference on Transparent Optical Networks
ISSN	2162-7339

Keywords

Nanolenses
Plasmonics
Effective medium theory
Nanophotonics
Multilayers
Superresolution
Transfer matrix method
Single expression method
Finite-difference time-domain method

Access to Document

10.1109/ICTON.2011.5970809

http://www.ict.kth.se/MAP/FMI/Negonet/icton2011/

OpenUrl availability

Check availability in DTU Findit

Cite this

Stefaniuk, T., Kotyński, R., Baghdasaryan, H., Pastuszczak, A., Marciniak, M., Lavrinenko, A., Panajotov, K., & Szoplik, T. (2011). Review of the results of the COST MP0702 exercise on the sensitivity of metal-dielectric layered flat lens to fabrication inaccuracies. In 2011 13th International Conference on Transparent Optical Networks (ICTON) (pp. Mo.C2.6). IEEE. https://doi.org/10.1109/ICTON.2011.5970809

@inproceedings{9dfbb876609140eba143f7f4090100e0,

title = "Review of the results of the COST MP0702 exercise on the sensitivity of metal-dielectric layered flat lens to fabrication inaccuracies",

abstract = "We summarise the results of the COST MP0702 exercise on the sensitivity of metal-dielectric layered superlens to fabrication inaccuracies. The major results of this joint task have been already published in Ref. 1, Opto- Electronics Review, vol. 18(4), pp. 446-457, 2010. The numerical analysis of the superlens is based on the transfer matrix method, the finite-difference time-domain technique, and the method of single expression, and is compared with a simplified effective medium approach. The lens is designed for imaging with subwavelength resolution at wavelength of 441 nm. Its operation may be attributed to self-collimation with a secondary role of Fabry-Perot resonant transmission. We have estimated the resolution, transmission efficiency and sensitivity with respect to fabrication inaccuracies of this superlens. The tolerance analysis indicates that the resolution and transmission efficiency are highly sensitive to even small changes of layer thicknesses.",

keywords = "Nanolenses, Plasmonics, Effective medium theory, Nanophotonics, Multilayers, Superresolution, Transfer matrix method, Single expression method, Finite-difference time-domain method",

author = "Tomasz Stefaniuk and Rafal Koty{\'n}ski and Hovik Baghdasaryan and Anna Pastuszczak and Marian Marciniak and Andrei Lavrinenko and Krassimir Panajotov and Tomasz Szoplik",

year = "2011",

doi = "10.1109/ICTON.2011.5970809",

language = "English",

isbn = "978-1-4577-0881-7",

series = "International Conference on Transparent Optical Networks",

publisher = "IEEE",

pages = "Mo.C2.6",

booktitle = "2011 13th International Conference on Transparent Optical Networks (ICTON)",

address = "United States",

note = "13th International Conference on Transparent Optical Networks (ICTON) ; Conference date: 26-06-2011 Through 30-06-2011",

}

Stefaniuk, T, Kotyński, R, Baghdasaryan, H, Pastuszczak, A, Marciniak, M, Lavrinenko, A, Panajotov, K & Szoplik, T 2011, Review of the results of the COST MP0702 exercise on the sensitivity of metal-dielectric layered flat lens to fabrication inaccuracies. in 2011 13th International Conference on Transparent Optical Networks (ICTON). IEEE, International Conference on Transparent Optical Networks, pp. Mo.C2.6, 13th International Conference on Transparent Optical Networks (ICTON), Stockholm, Sweden, 26/06/2011. https://doi.org/10.1109/ICTON.2011.5970809

Review of the results of the COST MP0702 exercise on the sensitivity of metal-dielectric layered flat lens to fabrication inaccuracies. / Stefaniuk, Tomasz; Kotyński, Rafal; Baghdasaryan, Hovik et al.
2011 13th International Conference on Transparent Optical Networks (ICTON). IEEE, 2011. p. Mo.C2.6 (International Conference on Transparent Optical Networks).

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

TY - GEN

T1 - Review of the results of the COST MP0702 exercise on the sensitivity of metal-dielectric layered flat lens to fabrication inaccuracies

AU - Stefaniuk, Tomasz

AU - Kotyński, Rafal

AU - Baghdasaryan, Hovik

AU - Pastuszczak, Anna

AU - Marciniak, Marian

AU - Lavrinenko, Andrei

AU - Panajotov, Krassimir

AU - Szoplik, Tomasz

PY - 2011

Y1 - 2011

N2 - We summarise the results of the COST MP0702 exercise on the sensitivity of metal-dielectric layered superlens to fabrication inaccuracies. The major results of this joint task have been already published in Ref. 1, Opto- Electronics Review, vol. 18(4), pp. 446-457, 2010. The numerical analysis of the superlens is based on the transfer matrix method, the finite-difference time-domain technique, and the method of single expression, and is compared with a simplified effective medium approach. The lens is designed for imaging with subwavelength resolution at wavelength of 441 nm. Its operation may be attributed to self-collimation with a secondary role of Fabry-Perot resonant transmission. We have estimated the resolution, transmission efficiency and sensitivity with respect to fabrication inaccuracies of this superlens. The tolerance analysis indicates that the resolution and transmission efficiency are highly sensitive to even small changes of layer thicknesses.

AB - We summarise the results of the COST MP0702 exercise on the sensitivity of metal-dielectric layered superlens to fabrication inaccuracies. The major results of this joint task have been already published in Ref. 1, Opto- Electronics Review, vol. 18(4), pp. 446-457, 2010. The numerical analysis of the superlens is based on the transfer matrix method, the finite-difference time-domain technique, and the method of single expression, and is compared with a simplified effective medium approach. The lens is designed for imaging with subwavelength resolution at wavelength of 441 nm. Its operation may be attributed to self-collimation with a secondary role of Fabry-Perot resonant transmission. We have estimated the resolution, transmission efficiency and sensitivity with respect to fabrication inaccuracies of this superlens. The tolerance analysis indicates that the resolution and transmission efficiency are highly sensitive to even small changes of layer thicknesses.

KW - Nanolenses

KW - Plasmonics

KW - Effective medium theory

KW - Nanophotonics

KW - Multilayers

KW - Superresolution

KW - Transfer matrix method

KW - Single expression method

KW - Finite-difference time-domain method

U2 - 10.1109/ICTON.2011.5970809

DO - 10.1109/ICTON.2011.5970809

M3 - Article in proceedings

SN - 978-1-4577-0881-7

T3 - International Conference on Transparent Optical Networks

SP - Mo.C2.6

BT - 2011 13th International Conference on Transparent Optical Networks (ICTON)

PB - IEEE

T2 - 13th International Conference on Transparent Optical Networks (ICTON)

Y2 - 26 June 2011 through 30 June 2011

ER -

Stefaniuk T, Kotyński R, Baghdasaryan H, Pastuszczak A, Marciniak M, Lavrinenko A et al. Review of the results of the COST MP0702 exercise on the sensitivity of metal-dielectric layered flat lens to fabrication inaccuracies. In 2011 13th International Conference on Transparent Optical Networks (ICTON). IEEE. 2011. p. Mo.C2.6. (International Conference on Transparent Optical Networks). doi: 10.1109/ICTON.2011.5970809

Review of the results of the COST MP0702 exercise on the sensitivity of metal-dielectric layered flat lens to fabrication inaccuracies

Abstract

Conference

Keywords

Access to Document

OpenUrl availability

Fingerprint

Cite this