Removal of hydrogen sulphide from pig house using biofilter with fungi

Michael J. Hansen*, Claus L. Pedersen, Louise H. Søgaard Jensen, Lise B. Guldberg, Anders Feilberg, Lars P. Nielsen

*Corresponding author for this work

    Research output: Contribution to journalJournal articleResearchpeer-review

    1 Downloads (Pure)

    Abstract

    Biological air cleaners used for reducing emissions of odorants are often challenged by the low solubility of reduced sulphur compounds. In a recent study high removal of hydrogen sulphide (∼75%) from the exhaust air from a pig house was achieved using a biofilter. The aim of this study was to investigate if this high removal could be due to the presence of fungi. The removal of reduced sulphur compounds in a 600-mm wide cellulose biofilter was measured at depths of 0, 200, 400 and 600 mm and the results compared with estimated fungal hyphae surface area per biofilm area. Over 19 months, removal of hydrogen sulphide was measured during periods with and without fungi. The results demonstrate a correlation between the fungal hyphae surface area and the removal of hydrogen sulphide with the highest removal in the first 200 mm of the biofilter and decreasing removal with depth. During periods with presence of fungi, the removal of hydrogen sulphide (64%) was significantly higher than during periods without fungi (18%). It is hypothesised that the observed fungi oxidise hydrogen sulphide and may play a major role in biofilters treating air from pig houses due to the expansion of the active surface area caused by the hyphae.
    Original languageEnglish
    JournalBiosystems Engineering
    Volume167
    Pages (from-to)32-39
    ISSN1537-5110
    DOIs
    Publication statusPublished - 2018

    Keywords

    • Biofiltration of waste gases
    • Chemical analysis
    • Odours
    • Sulphur compounds
    • Microbiology

    Fingerprint

    Dive into the research topics of 'Removal of hydrogen sulphide from pig house using biofilter with fungi'. Together they form a unique fingerprint.

    Cite this