Reliability of Electrochemical Techniques for Determining Corrosion Rates on Carbon Steel in Sulfide Media

Research output: Contribution to journalJournal article – Annual report year: 2007Researchpeer-review

View graph of relations

Effects of film formation on carbon steel in hydrogen sulfide (H2S) media may corrupt corrosion rate monitoring by electrochemical techniques. Electrochemical data from H2S solutions, biological sulfide media, and natural sulfide containing geothermal water have been collected, and the process of film formation in sulfide solutins was followed by video. It can be shown that capacitative and diffusional effects due to porous reactive deposits tend to dominate the data, resulting in unreliable corrosion rates measured using electrochemical techniques. The effect is strongly increased if the biofilm in combination with ferrous sulfide corrosion products cover the steel surface. Corrosion rates can be overestimated by a factor of 10 to 100 with electrochemical techniques - both by linear polarization resistance (LPR) and electrochemicel impedance spectroscopy (EIS). Oxygen entering the system accelerates corrosion rates, but this effect may not be detected if rates are already overestimated. It is concluded that electrochemical techniques can be used for corrosion reate monitoring in some H2S media, but care must be taken in the choice of scan ratre; it is important to realize when direct techniques like electrical resistance or mass loss should be used instead.
Original languageEnglish
JournalCorrosion
Volume63
Issue number4
Pages (from-to)346-358
ISSN0010-9312
Publication statusPublished - 2007

    Research areas

  • Film formation, Sulfide, Carbon steel, Corrosion rate monitoring, Capacitance, Polarization resistance

ID: 3023496