Reduced design load basis for ultimate blade loads estimation in multidisciplinary design optimization frameworks

Research output: Contribution to journalConference article – Annual report year: 2016Researchpeer-review

Documents

DOI

View graph of relations

The aim is to provide a fast and reliable approach to estimate ultimate blade loads for a multidisciplinary design optimization (MDO) framework. For blade design purposes, the standards require a large amount of computationally expensive simulations, which cannot be efficiently run each cost function evaluation of an MDO process. This work describes a method that allows integrating the calculation of the blade load envelopes inside an MDO loop. Ultimate blade load envelopes are calculated for a baseline design and a design obtained after an iteration of an MDO. These envelopes are computed for a full standard design load basis (DLB) and a deterministic reduced DLB. Ultimate loads extracted from the two DLBs with the two blade designs each are compared and analyzed. Although the reduced DLB supplies ultimate loads of different magnitude, the shape of the estimated envelopes are similar to the one computed using the full DLB. This observation is used to propose a scheme that is computationally cheap, and that can be integrated inside an MDO framework, providing a sufficiently reliable estimation of the blade ultimate loading. The latter aspect is of key importance when design variables implementing passive control methodologies are included in the formulation of the optimization problem. An MDO of a 10 MW wind turbine blade is presented as an applied case study to show the efficacy of the reduced DLB concept.
Original languageEnglish
Article number062005
Book seriesJournal of Physics: Conference Series (Online)
Volume753
Number of pages15
ISSN1742-6596
DOIs
Publication statusPublished - 2016
EventThe Science of Making Torque from Wind 2016 - Technische Universität München (TUM), Munich, Germany
Duration: 5 Oct 20167 Oct 2016
Conference number: 6
https://www.events.tum.de/?sub=29

Conference

ConferenceThe Science of Making Torque from Wind 2016
Number6
LocationTechnische Universität München (TUM)
CountryGermany
CityMunich
Period05/10/201607/10/2016
Internet address

Bibliographical note

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

CitationsWeb of Science® Times Cited: No match on DOI

Download statistics

No data available

ID: 127151795