Recrystallization textures and microstructures of Al-0.3%Cu alloy after deformation to high strains

X.R. Li, A. Wakeel, T.L. Huang, G.L. Wu, Xiaoxu Huang

Research output: Contribution to journalConference articleResearchpeer-review

338 Downloads (Pure)

Abstract

An Al-0.3%Cu alloy was deformed to high strains by cold rolling. The as-deformed samples were annealed at different temperatures until complete recrystallization. The cold rolling textures were determined by X-ray diffraction while the recrystallization textures and microstructures were characterized by electron backscatter diffraction. It was found that the rolling texture was characterized by a strong Brass component. After complete recrystallization Goss and Cube textures were developed. The effects of deformation strain and annealing temperature on the recrystallization textures are discussed.
Original languageEnglish
Article number012032
JournalI O P Conference Series: Materials Science and Engineering
Volume89
Number of pages7
ISSN1757-8981
DOIs
Publication statusPublished - 2015
Event36th Risø International Symposium on Materials Science - DTU Risø Campus, Roskilde, Denmark
Duration: 7 Sep 201511 Sep 2015
Conference number: 36

Conference

Conference36th Risø International Symposium on Materials Science
Number36
LocationDTU Risø Campus
CountryDenmark
CityRoskilde
Period07/09/201511/09/2015

Bibliographical note

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI. Published under licence by IOP Publishing Ltd

Fingerprint Dive into the research topics of 'Recrystallization textures and microstructures of Al-0.3%Cu alloy after deformation to high strains'. Together they form a unique fingerprint.

Cite this