Reaming process improvement and control: An application of statistical engineering

Pavel Müller; G. Genta; G. Barbato; Leonardo De Chiffre; R. Levi

doi:10.1016/j.cirpj.2012.07.005

Reaming process improvement and control: An application of statistical engineering

Pavel Müller, G. Genta, G. Barbato, Leonardo De Chiffre, R. Levi

Polytechnic University of Turin

Research output: Contribution to journal › Journal article › Research › peer-review

2 Downloads (Pure)

Abstract

A reaming operation had to be performed within given technological and economical constraints. Process improvement under realistic conditions was the goal of a statistical engineering project, supported by a comprehensive experimental investigation providing detailed information on single and combined effects of several parameters on key responses. Results supported selection of production parameters meeting specified quality and cost targets, as well as substantial improvements.

Original language	English
Journal	CIRP Journal of Manufacturing Science and Technology
Volume	5
Issue number	3
Pages (from-to)	196-201
ISSN	1755-5817
DOIs	https://doi.org/10.1016/j.cirpj.2012.07.005
Publication status	Published - 2012

Keywords

Reaming
Surface roughness
Hole diameter
Quality control
Statistical engineering
Process improvement

Access to Document

10.1016/j.cirpj.2012.07.005

OpenUrl availability

Full text

Cite this

@article{809446c690a949429c6c12feae1f4339,

title = "Reaming process improvement and control: An application of statistical engineering",

abstract = "A reaming operation had to be performed within given technological and economical constraints. Process improvement under realistic conditions was the goal of a statistical engineering project, supported by a comprehensive experimental investigation providing detailed information on single and combined effects of several parameters on key responses. Results supported selection of production parameters meeting specified quality and cost targets, as well as substantial improvements.",

keywords = "Reaming, Surface roughness, Hole diameter, Quality control, Statistical engineering, Process improvement",

author = "Pavel M{\"u}ller and G. Genta and G. Barbato and {De Chiffre}, Leonardo and R. Levi",

year = "2012",

doi = "10.1016/j.cirpj.2012.07.005",

language = "English",

volume = "5",

pages = "196--201",

journal = "CIRP Journal of Manufacturing Science and Technology",

issn = "1755-5817",

publisher = "Elsevier",

number = "3",

}

TY - JOUR

T1 - Reaming process improvement and control: An application of statistical engineering

AU - Müller, Pavel

AU - Genta, G.

AU - Barbato, G.

AU - De Chiffre, Leonardo

AU - Levi, R.

PY - 2012

Y1 - 2012

N2 - A reaming operation had to be performed within given technological and economical constraints. Process improvement under realistic conditions was the goal of a statistical engineering project, supported by a comprehensive experimental investigation providing detailed information on single and combined effects of several parameters on key responses. Results supported selection of production parameters meeting specified quality and cost targets, as well as substantial improvements.

AB - A reaming operation had to be performed within given technological and economical constraints. Process improvement under realistic conditions was the goal of a statistical engineering project, supported by a comprehensive experimental investigation providing detailed information on single and combined effects of several parameters on key responses. Results supported selection of production parameters meeting specified quality and cost targets, as well as substantial improvements.

KW - Reaming

KW - Surface roughness

KW - Hole diameter

KW - Quality control

KW - Statistical engineering

KW - Process improvement

U2 - 10.1016/j.cirpj.2012.07.005

DO - 10.1016/j.cirpj.2012.07.005

M3 - Journal article

SN - 1755-5817

VL - 5

SP - 196

EP - 201

JO - CIRP Journal of Manufacturing Science and Technology

JF - CIRP Journal of Manufacturing Science and Technology

IS - 3

ER -

Reaming process improvement and control: An application of statistical engineering

Abstract

Keywords

Access to Document

OpenUrl availability

Fingerprint

Cite this