Progress report on reversal and substitute element technique for thread calibration on CMMs

Simone Carmignato; Erik Larsen; Rene Sobiecki; Leonardo De Chiffre

Progress report on reversal and substitute element technique for thread calibration on CMMs

Simone Carmignato, Erik Larsen, Rene Sobiecki, Leonardo De Chiffre

Research output: Book/Report › Report

Abstract

This report is made as a part of the project EASYTRAC, an EU project under the programme Competitive and Sustainable Growth: Contract No. G6RD-CT-2000-00188, coordinated by UNIMETRIK S.A. (Spain). The project is concerned with low uncertainty calibrations on coordinate measuring machines. For this project, the Centre for Geometrical Metrology (CGM) at the Technical University of Denmark (DTU) takes care of thread measurements, in collaboration with Dipartimento di Innovazione Meccanica e Gestionale (DIMEG) - University of Padova - Italy, Physikalisch-Technische Bundesanstalt Braunschweig (PTB) - Germany and Tampere University of Technology (TUT) - Finland. The present report describes feasibility and preliminary results of a reversal and substitute element technique application for thread calibration.

Original language	English

Publisher	IPL
Number of pages	26
Publication status	Published - 2002

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Cite this

@book{60acad73f12c4c9f88106106d1beb4b1,

title = "Progress report on reversal and substitute element technique for thread calibration on CMMs",

abstract = "This report is made as a part of the project EASYTRAC, an EU project under the programme Competitive and Sustainable Growth: Contract No. G6RD-CT-2000-00188, coordinated by UNIMETRIK S.A. (Spain). The project is concerned with low uncertainty calibrations on coordinate measuring machines. For this project, the Centre for Geometrical Metrology (CGM) at the Technical University of Denmark (DTU) takes care of thread measurements, in collaboration with Dipartimento di Innovazione Meccanica e Gestionale (DIMEG) - University of Padova - Italy, Physikalisch-Technische Bundesanstalt Braunschweig (PTB) - Germany and Tampere University of Technology (TUT) - Finland. The present report describes feasibility and preliminary results of a reversal and substitute element technique application for thread calibration.",

author = "Simone Carmignato and Erik Larsen and Rene Sobiecki and {De Chiffre}, Leonardo",

year = "2002",

language = "English",

publisher = "IPL",

}

TY - RPRT

T1 - Progress report on reversal and substitute element technique for thread calibration on CMMs

AU - Carmignato, Simone

AU - Larsen, Erik

AU - Sobiecki, Rene

AU - De Chiffre, Leonardo

PY - 2002

Y1 - 2002

N2 - This report is made as a part of the project EASYTRAC, an EU project under the programme Competitive and Sustainable Growth: Contract No. G6RD-CT-2000-00188, coordinated by UNIMETRIK S.A. (Spain). The project is concerned with low uncertainty calibrations on coordinate measuring machines. For this project, the Centre for Geometrical Metrology (CGM) at the Technical University of Denmark (DTU) takes care of thread measurements, in collaboration with Dipartimento di Innovazione Meccanica e Gestionale (DIMEG) - University of Padova - Italy, Physikalisch-Technische Bundesanstalt Braunschweig (PTB) - Germany and Tampere University of Technology (TUT) - Finland. The present report describes feasibility and preliminary results of a reversal and substitute element technique application for thread calibration.

AB - This report is made as a part of the project EASYTRAC, an EU project under the programme Competitive and Sustainable Growth: Contract No. G6RD-CT-2000-00188, coordinated by UNIMETRIK S.A. (Spain). The project is concerned with low uncertainty calibrations on coordinate measuring machines. For this project, the Centre for Geometrical Metrology (CGM) at the Technical University of Denmark (DTU) takes care of thread measurements, in collaboration with Dipartimento di Innovazione Meccanica e Gestionale (DIMEG) - University of Padova - Italy, Physikalisch-Technische Bundesanstalt Braunschweig (PTB) - Germany and Tampere University of Technology (TUT) - Finland. The present report describes feasibility and preliminary results of a reversal and substitute element technique application for thread calibration.

M3 - Report

BT - Progress report on reversal and substitute element technique for thread calibration on CMMs

PB - IPL

ER -

Progress report on reversal and substitute element technique for thread calibration on CMMs

Abstract

UN SDGs

Fingerprint

Cite this