Progress in IEC 61400-27: Electrical simulation models for wind power generation

Poul Ejnar Sørensen; Björn Andresen; John Bech; Jens Fortmann; Pouyan  Pourbeik

Progress in IEC 61400-27: Electrical simulation models for wind power generation

Poul Ejnar Sørensen, Björn Andresen, John Bech, Jens Fortmann, Pouyan Pourbeik

Department of Wind Energy

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Abstract

This paper presents the status of the ongoing work in IEC Technical Committee 88 Working Group 27 (TC88 WG27) developing a standard IEC 61400-27 for “Electrical simulation models for wind power generation”. The purpose of this standardization work is to define generic simulation models for wind turbines (part 1) and wind power plants (part 2), which are intended for short-term power system stability analyses. WG27 submitted the first CD of Part 1 in December 2012. The CD describes generic wind turbine models and a procedure for validation of wind turbine models. The generic model description consists of a general model structure intending to cover existing as well as future types of wind turbines, and specific fundamental frequency positive sequence models for the four wind turbine types which are widely used today. The validation procedure can be applied to the generic models specified in the standard, or to manufacturer specific fundamental frequency models. The paper will provide a general description of the wind turbine models, a more detailed description of type 4 models, a description of the validation procedure and finally a validation example. Part 2 is in an early stage of development. IEC has approved the New Work Item Proposal (NWIP) of part 2, and this work has officially started 1 October 2012.

Original language	English
Title of host publication	Proceedings of the 11th International Workshop on Large-Scale Integration of Wind Power into Power Systems as well as on Transmission Networks for Offshore Wind Power Plants
Number of pages	7
Publisher	IEEE
Publication date	2012
Publication status	Published - 2012
Event	11th International Workshop on Large-Scale Integration of Wind Power into Power Systems as well as on Transmission Networks for Offshore Wind Power Plants - Lisbon, Portugal Duration: 13 Nov 2012 → 15 Nov 2012

Conference

Conference	11th International Workshop on Large-Scale Integration of Wind Power into Power Systems as well as on Transmission Networks for Offshore Wind Power Plants
Country/Territory	Portugal
City	Lisbon
Period	13/11/2012 → 15/11/2012

Bibliographical note

The contribution from the Technical University of Denmark is partially funded by the Danish pre-standardisation project (Energinet.dk contract 2009-10179, Siemens Wind Power, Vestas and DONG Energy) and by the Danish Energy Technology Development and Demonstration Programme (EUDP)

Keywords

Electrical Simulation models
IEC standard
Wind turbine model
Power system stability studies

Access to Document

http://www.windintegrationworkshop.org/lisbon2012/index.html

SFX availability

Full text

1 Membership of commitees, commissions, boards, councils, associations, organisations, or similar

IEC (International Electrotechnical Commission) (External organisation)
Poul Ejnar Sørensen (Chairman)
Apr 2009 → …
Activity: Membership › Membership of commitees, commissions, boards, councils, associations, organisations, or similar

Cite this

Sørensen, P. E., Andresen, B., Bech, J., Fortmann, J., & Pourbeik, P. (2012). Progress in IEC 61400-27: Electrical simulation models for wind power generation. In Proceedings of the 11th International Workshop on Large-Scale Integration of Wind Power into Power Systems as well as on Transmission Networks for Offshore Wind Power Plants IEEE. http://www.windintegrationworkshop.org/lisbon2012/index.html

@inproceedings{8f9c8a26a49d4a42aa5d8121b1ac863c,

title = "Progress in IEC 61400-27: Electrical simulation models for wind power generation",

abstract = "This paper presents the status of the ongoing work in IEC Technical Committee 88 Working Group 27 (TC88 WG27) developing a standard IEC 61400-27 for “Electrical simulation models for wind power generation”. The purpose of this standardization work is to define generic simulation models for wind turbines (part 1) and wind power plants (part 2), which are intended for short-term power system stability analyses. WG27 submitted the first CD of Part 1 in December 2012. The CD describes generic wind turbine models and a procedure for validation of wind turbine models. The generic model description consists of a general model structure intending to cover existing as well as future types of wind turbines, and specific fundamental frequency positive sequence models for the four wind turbine types which are widely used today. The validation procedure can be applied to the generic models specified in the standard, or to manufacturer specific fundamental frequency models. The paper will provide a general description of the wind turbine models, a more detailed description of type 4 models, a description of the validation procedure and finally a validation example. Part 2 is in an early stage of development. IEC has approved the New Work Item Proposal (NWIP) of part 2, and this work has officially started 1 October 2012.",

keywords = "Electrical Simulation models, IEC standard, Wind turbine model, Power system stability studies",

author = "S{\o}rensen, {Poul Ejnar} and Bj{\"o}rn Andresen and John Bech and Jens Fortmann and Pouyan Pourbeik",

note = "The contribution from the Technical University of Denmark is partially funded by the Danish pre-standardisation project (Energinet.dk contract 2009-10179, Siemens Wind Power, Vestas and DONG Energy) and by the Danish Energy Technology Development and Demonstration Programme (EUDP); 11th International Workshop on Large-Scale Integration of Wind Power into Power Systems as well as on Transmission Networks for Offshore Wind Power Plants ; Conference date: 13-11-2012 Through 15-11-2012",

year = "2012",

language = "English",

booktitle = "Proceedings of the 11th International Workshop on Large-Scale Integration of Wind Power into Power Systems as well as on Transmission Networks for Offshore Wind Power Plants",

publisher = "IEEE",

address = "United States",

}

Sørensen, PE, Andresen, B, Bech, J, Fortmann, J & Pourbeik, P 2012, Progress in IEC 61400-27: Electrical simulation models for wind power generation. in Proceedings of the 11th International Workshop on Large-Scale Integration of Wind Power into Power Systems as well as on Transmission Networks for Offshore Wind Power Plants. IEEE, 11th International Workshop on Large-Scale Integration of Wind Power into Power Systems as well as on Transmission Networks for Offshore Wind Power Plants, Lisbon, Portugal, 13/11/2012. <http://www.windintegrationworkshop.org/lisbon2012/index.html>

Progress in IEC 61400-27 : Electrical simulation models for wind power generation. / Sørensen, Poul Ejnar; Andresen, Björn; Bech, John; Fortmann, Jens; Pourbeik, Pouyan .

Proceedings of the 11th International Workshop on Large-Scale Integration of Wind Power into Power Systems as well as on Transmission Networks for Offshore Wind Power Plants. IEEE, 2012.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

TY - GEN

T1 - Progress in IEC 61400-27

T2 - 11th International Workshop on Large-Scale Integration of Wind Power into Power Systems as well as on Transmission Networks for Offshore Wind Power Plants

AU - Sørensen, Poul Ejnar

AU - Andresen, Björn

AU - Bech, John

AU - Fortmann, Jens

AU - Pourbeik, Pouyan

N1 - The contribution from the Technical University of Denmark is partially funded by the Danish pre-standardisation project (Energinet.dk contract 2009-10179, Siemens Wind Power, Vestas and DONG Energy) and by the Danish Energy Technology Development and Demonstration Programme (EUDP)

PY - 2012

Y1 - 2012

N2 - This paper presents the status of the ongoing work in IEC Technical Committee 88 Working Group 27 (TC88 WG27) developing a standard IEC 61400-27 for “Electrical simulation models for wind power generation”. The purpose of this standardization work is to define generic simulation models for wind turbines (part 1) and wind power plants (part 2), which are intended for short-term power system stability analyses. WG27 submitted the first CD of Part 1 in December 2012. The CD describes generic wind turbine models and a procedure for validation of wind turbine models. The generic model description consists of a general model structure intending to cover existing as well as future types of wind turbines, and specific fundamental frequency positive sequence models for the four wind turbine types which are widely used today. The validation procedure can be applied to the generic models specified in the standard, or to manufacturer specific fundamental frequency models. The paper will provide a general description of the wind turbine models, a more detailed description of type 4 models, a description of the validation procedure and finally a validation example. Part 2 is in an early stage of development. IEC has approved the New Work Item Proposal (NWIP) of part 2, and this work has officially started 1 October 2012.

AB - This paper presents the status of the ongoing work in IEC Technical Committee 88 Working Group 27 (TC88 WG27) developing a standard IEC 61400-27 for “Electrical simulation models for wind power generation”. The purpose of this standardization work is to define generic simulation models for wind turbines (part 1) and wind power plants (part 2), which are intended for short-term power system stability analyses. WG27 submitted the first CD of Part 1 in December 2012. The CD describes generic wind turbine models and a procedure for validation of wind turbine models. The generic model description consists of a general model structure intending to cover existing as well as future types of wind turbines, and specific fundamental frequency positive sequence models for the four wind turbine types which are widely used today. The validation procedure can be applied to the generic models specified in the standard, or to manufacturer specific fundamental frequency models. The paper will provide a general description of the wind turbine models, a more detailed description of type 4 models, a description of the validation procedure and finally a validation example. Part 2 is in an early stage of development. IEC has approved the New Work Item Proposal (NWIP) of part 2, and this work has officially started 1 October 2012.

KW - Electrical Simulation models

KW - IEC standard

KW - Wind turbine model

KW - Power system stability studies

M3 - Article in proceedings

BT - Proceedings of the 11th International Workshop on Large-Scale Integration of Wind Power into Power Systems as well as on Transmission Networks for Offshore Wind Power Plants

PB - IEEE

Y2 - 13 November 2012 through 15 November 2012

ER -

Progress in IEC 61400-27: Electrical simulation models for wind power generation

Abstract

Conference

Bibliographical note

Keywords

Access to Document

SFX availability

Fingerprint

Activities

IEC (International Electrotechnical Commission) (External organisation)

Cite this