In present study, nanosized iron oxides particles are synthetised by easy one step precipitation from Mohric salt (NH4)2Fe(SO4)2·6H2O reacting with sodium hydroxide solution in temperature up to 60 °C. When changing the time of reaction, the iron oxide particles of different shape are prepared and when drying wet extracted particles at elevated temperature of 60 °C the change of 2D shaped morphology is observed. Depending on the time of reaction different ratios of FeOOH and Fe3O4 are obtained in this study. DTA – TGA, XRD, FTIR and SEM are used for the characterisation of particles in this study.
|Journal||Journal of Experimental Nanoscience|
|Publication status||Published - 2021|
Bibliographical noteThis is an Open Access article distributed under the terms of the Creative Commons Attribution-NonCommercial License (http:// creativecommons.org/licenses/by-nc/4.0/), which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
- Magnetic nanoparticles
- Iron oxides