Power Curve Measurements, REWS

Research output: Book/ReportReport

Abstract

This report describes the power curve measurements carried out on a given wind turbine in a chosen period. The measurements were carried out following the measurement procedure in the draft of IEC 61400-12-1 Ed.2 [1], with some deviations mostly regarding uncertainty calculation. Here, the reference wind speed used in the power curve is the equivalent wind speed obtained from lidar measurements at several heights between lower and upper blade tip, in combination with a hub height meteorological mast. The measurements have been performed using DTU’s measurement equipment, the analysis and quality control has been performed by DTU.
Original languageEnglish
PublisherDTU Wind Energy
Number of pages75
Publication statusPublished - 2014
SeriesDTU Wind Energy WTT I
Number1097(EN)

Bibliographical note

This is an internal report and therefore not available in full text. Please contact author's or director of author's department for further information.

Keywords

  • DTU Wind Energy WTT I-1097(EN)
  • WTT-I-1097
  • WTT-I-1097(EN)

Fingerprint Dive into the research topics of 'Power Curve Measurements, REWS'. Together they form a unique fingerprint.

Cite this