Power Curve Investigation

Héctor Villanueva, Paolo Federici

Research output: Book/ReportReport


This report describes the analysis carried out with data from a client, in a given period. The measurements are those from the SCADA system of the turbine in question. The purpose of the analysis is to correlate the power output of the wind turbine to the wind speed measured by its nacelle-mounted anemometer. The measurements and analysis are not performed according to IEC 61400-12-1 [1]. Therefore, the results presented in this report cannot be considered a power curve according to the reference standard, and are referred to as “power curve investigation” instead.
Original languageEnglish
PublisherDTU Wind Energy
Number of pages22
Publication statusPublished - 2018
SeriesDTU Wind Energy WTT I
Number1260 (EN)

Bibliographical note

This is an internal report and therefore not available in full text. Please contact author's or director of author's department for further information.


Dive into the research topics of 'Power Curve Investigation'. Together they form a unique fingerprint.

Cite this