Perovskite-based detector for reactor dosimetry monitoring

Hybrid halide perovskites have demonstrated significant efficiency in detecting a broad spectrum of high-energy radiation, including X-rays, gamma rays (γ-rays), and neutrons. Given the common occurrence of mixed radiation fields, we investigated the performance of a perovskite-based detector in a neutron-gamma mixed field. A large methylammonium lead tribromide (MAPbBr₃) single crystal (SC) was synthesized via the oriented crystal-crystal intergrowth method. This SC was used to fabricate a gamma detector with carbon electrodes, which was tested in the CROCUS zero-power reactor cavity. The detector's photocurrent response exhibited a strong correlation with known gamma dose rates, as measured by an ambient Berthold LB 112 gamma probe, facilitating the accurate conversion of photocurrent to dose rate. Notably, the device did not exhibit degradation under neutron radiation exposure. To further assess the impact of neutrons, X-ray diffraction and electron paramagnetic resonance analyses were performed on small MAPbBr₃ SCs grown by inverse temperature crystallization. These SCs were irradiated within the CROCUS reactor core and by a Pu-Be neutron source at liquid nitrogen temperature. Our findings indicate that the perovskite material can withstand the nominal in-core operation conditions of the CROCUS reactor. Additionally, it endures irradiation at liquid nitrogen temperature, corresponding to a fast neutron fluence of approximately 10¹⁰ cm^-2 and a gamma radiation dose of about 50 Gy, confirming only the temporary creation of defects. No signs of long-term deterioration were observed, suggesting a potential self-healing mechanism. This resilience positions perovskite SCs as viable candidates for in-core radiation detection, supporting the further development of miniaturized MAPbBr₃ SC devices for such applications.