Permeability shifts in chalk core during produced water reinjection

Chalk reservoirs, due to their high porosity and very low permeability, represent one of the most interesting cases for engineering studies of carbonates. They exhibit complex fluid-rock interactions because of their reactive surfaces and dense porous medium. The reinjection of produced water is an attractive strategy for managing wastewater flow from oil wells. However, the complex composition of produced water, the reactive nature of carbonate rocks, and their low permeability create challenges related to permeability loss.
This study examines the stages of permeability change during core flooding experiments up to the point of complete clogging. A distinctive feature of this study is the presence of residual oil in the core samples, which simulates real reservoir conditions during produced water reinjection. The presence of residual oil is an additional factor influencing the change in core permeability, but there is no clear consensus in the research community on its impact on permeability during produced water injection.
All experiments were conducted in a core flooding system simulating well conditions in terms of pressure (170 bar) and temperature (70 ◦C). Produced water samples from the Dan field were used to replicate the chemical and thermodynamic processes occurring in a real well. The experiments identified three stages of permeability change: an initial increase in permeability (+12%), a period of pressure stabilization, and a subsequent decrease in permeability (− 8%) due to the formation of inorganic precipitates within the core channels.
The primary objective of the experiments is to investigate the relationship between permeability changes and the stages of reinjection, with a focus on the effects of residual oil. The study focuses on identifying the processes occurring up to the point of complete clogging, considering the impact of residual oil saturation in the chalk core samples. Image analysis using scanning electron microscopy, particle size measurement with a zeta-potential meter, and thermodynamic scale formation modeling with ScaleCERE software were employed to explain these processes.
Three stages of permeability change were identified during the injection of 200 pore volumes of produced water: increased permeability (+12%), pressure stabilization, and decreased permeability (− 8%). The positive influence of residual oil saturation on the filtration and storage properties of the reservoir was established, due to the mobilization of chalk core particles. Additionally, the theory of core channel clogging during the reinjection of formation water by the formation of inorganic precipitates within the channels was confirmed.
Understanding the causes of permeability reduction that occurred during the stage of permeability decrease enables the development of water purification methods specifically targeted at the causes of rock clogging. Predicting the process of injecting a mixture of produced and seawater will help in interpreting the data during disposal operations by injecting formation water into an injection well, and it will allow for the selection of effective measures to mitigate the impact on the reservoir.