Performance of a Folded-Strip Toroidally Wound Induction Machine

Bogi Bech Jensen, Alan G. Jack, Glynn J. Atkinson, Barrie C. Mecrow

Research output: Contribution to journalJournal articleResearchpeer-review

1 Downloads (Pure)

Abstract

This paper presents the measured experimental results from a four-pole toroidally wound induction machine, where the stator is constructed as a pre-wound foldable strip. It shows that if the machine is axially restricted in length, the toroidally wound induction machine can have substantially shorter stator end-windings than conventionally wound induction machines, and hence that a toroidally wound induction machine can have lower losses and a higher efficiency. The paper also presents the employed construction method, which emphasizes manufacturability, and highlights the advantages and disadvantages of this method.
Original languageEnglish
JournalI E E E Transactions on Industrial Electronics
Volume59
Issue number5
Pages (from-to)2217 - 2226
ISSN0278-0046
DOIs
Publication statusPublished - 2011

Keywords

  • Measurement
  • Toroidal Windings
  • Prototyping
  • Toroidally Wound Machines
  • Windings
  • Induction motors
  • Rotating Machines
  • AC machines

Cite this

Jensen, Bogi Bech ; Jack, Alan G. ; Atkinson, Glynn J. ; Mecrow, Barrie C. / Performance of a Folded-Strip Toroidally Wound Induction Machine. In: I E E E Transactions on Industrial Electronics. 2011 ; Vol. 59, No. 5. pp. 2217 - 2226.
@article{87a355ee3fd347f3a11c62d7e390be31,
title = "Performance of a Folded-Strip Toroidally Wound Induction Machine",
abstract = "This paper presents the measured experimental results from a four-pole toroidally wound induction machine, where the stator is constructed as a pre-wound foldable strip. It shows that if the machine is axially restricted in length, the toroidally wound induction machine can have substantially shorter stator end-windings than conventionally wound induction machines, and hence that a toroidally wound induction machine can have lower losses and a higher efficiency. The paper also presents the employed construction method, which emphasizes manufacturability, and highlights the advantages and disadvantages of this method.",
keywords = "Measurement, Toroidal Windings, Prototyping, Toroidally Wound Machines, Windings, Induction motors, Rotating Machines, AC machines",
author = "Jensen, {Bogi Bech} and Jack, {Alan G.} and Atkinson, {Glynn J.} and Mecrow, {Barrie C.}",
year = "2011",
doi = "10.1109/TIE.2011.2138115",
language = "English",
volume = "59",
pages = "2217 -- 2226",
journal = "I E E E Transactions on Industrial Electronics",
issn = "0278-0046",
publisher = "Institute of Electrical and Electronics Engineers",
number = "5",

}

Performance of a Folded-Strip Toroidally Wound Induction Machine. / Jensen, Bogi Bech; Jack, Alan G.; Atkinson, Glynn J.; Mecrow, Barrie C.

In: I E E E Transactions on Industrial Electronics, Vol. 59, No. 5, 2011, p. 2217 - 2226.

Research output: Contribution to journalJournal articleResearchpeer-review

TY - JOUR

T1 - Performance of a Folded-Strip Toroidally Wound Induction Machine

AU - Jensen, Bogi Bech

AU - Jack, Alan G.

AU - Atkinson, Glynn J.

AU - Mecrow, Barrie C.

PY - 2011

Y1 - 2011

N2 - This paper presents the measured experimental results from a four-pole toroidally wound induction machine, where the stator is constructed as a pre-wound foldable strip. It shows that if the machine is axially restricted in length, the toroidally wound induction machine can have substantially shorter stator end-windings than conventionally wound induction machines, and hence that a toroidally wound induction machine can have lower losses and a higher efficiency. The paper also presents the employed construction method, which emphasizes manufacturability, and highlights the advantages and disadvantages of this method.

AB - This paper presents the measured experimental results from a four-pole toroidally wound induction machine, where the stator is constructed as a pre-wound foldable strip. It shows that if the machine is axially restricted in length, the toroidally wound induction machine can have substantially shorter stator end-windings than conventionally wound induction machines, and hence that a toroidally wound induction machine can have lower losses and a higher efficiency. The paper also presents the employed construction method, which emphasizes manufacturability, and highlights the advantages and disadvantages of this method.

KW - Measurement

KW - Toroidal Windings

KW - Prototyping

KW - Toroidally Wound Machines

KW - Windings

KW - Induction motors

KW - Rotating Machines

KW - AC machines

U2 - 10.1109/TIE.2011.2138115

DO - 10.1109/TIE.2011.2138115

M3 - Journal article

VL - 59

SP - 2217

EP - 2226

JO - I E E E Transactions on Industrial Electronics

JF - I E E E Transactions on Industrial Electronics

SN - 0278-0046

IS - 5

ER -