Skip to main navigation Skip to search Skip to main content

Nickel/10 mol% scandia - 1 mol% yttria stabilised zirconia (10Sc1YSZ) fuel electrodes for solid oxide electrolysis cells

Research output: Contribution to journal › Journal article › Research › peer-review

17 Downloads (Orbit)

Abstract

Degradation of the fuel electrode remains a key challenge to solve for a wider adoption of solid oxide electrolysis cell (SOEC) technology to produce green H2. In this context, alternatives to the nickel (Ni)/8 mol% yttria stabilised zirconia (8YSZ) fuel electrode, less prone to Ni migration, are being sought. In this work, 10 mol% scandia-1 mol% yttria stabilised zirconia (10Sc1YSZ) is investigated as such an alternative. 10Sc1YSZ-based cells were fabricated by tape casting, screen printing and low temperature sintering. Improvements in durability are observed compared to the state-of-the-art Ni/8YSZ-based cells, which is found to correlate with absent Ni migration. A voltage degradation rate of 2 %/kh is measured at 750 °C and −0.75 A/cm2. Recovery of lost cell performance at −1.0 A/cm2 is found through idling the cell under open circuit conditions, indicating reversibility of fuel electrode degradation. Multi-physics impedance modelling is used to analyse changes in microstructural parameters. The phase stability of 10Sc1YSZ and reduction conditions of the electrodes are investigated, showing an impact on the cell durability. The Ni/10Sc1YSZ fuel electrodes, requiring only minor modifications to the state-of-the-art Ni/yttria stabilised zirconia electrodes, demonstrate improved durability and suppressed Ni migration.
Original languageEnglish
Article number239609
JournalJournal of Power Sources
Volume671
Number of pages14
ISSN0378-7753
DOIs
Publication statusPublished - 2026

Fingerprint

Dive into the research topics of 'Nickel/10 mol% scandia - 1 mol% yttria stabilised zirconia (10Sc1YSZ) fuel electrodes for solid oxide electrolysis cells'. Together they form a unique fingerprint.

Cite this