Model-based evaluation of selenate and nitrate reduction in hydrogen-based membrane biofilm reactor

Research output: Contribution to journalJournal article – Annual report year: 2019Researchpeer-review

View graph of relations

A biofilm model was developed to describe the simultaneous NO3− and SeO42− reduction in a H2-based membrane biofilm reactor (MBfR). Model calibration and validation was conducted using the experimental data of a reported H2-based MBfR. With a good level of identifiability, the SeO42− affinity constant and the SeO32− affinity constant were estimated at 9.80 ± 0.51 g Se m−3 and 1.83 ± 0.38 g Se m−3, respectively. The model was then applied to evaluate the effects of key operating conditions on the single-stage H2-based MBfR and the role of reactor configuration through comparing two-stage to single-stage MBfR systems. The results showed that (i) high SeO42− or low NO3− concentration in the influent favored the growth of selenate-reducing bacteria (SeRB) and therefore benefited the Se removal, (ii) the influent dissolved oxygen slightly inhibited the Se removal through enhancing the aerobic microbial respiration on H2, (iii) the H2 supply should be controlled at a proper level to avoid SeRB suppression and H2 wastage, (iv) thin biofilm should be avoided to ensure a protected niche for SeRB and therefore a promising Se removal, and (v) the two-stage MBfR configuration offered relatively higher efficiency in removing Se and NO3− simultaneously under the same loading condition.
Original languageEnglish
JournalChemical Engineering Science
Volume195
Pages (from-to)262-270
Number of pages9
ISSN0009-2509
DOIs
Publication statusPublished - 2019
CitationsWeb of Science® Times Cited: No match on DOI

    Research areas

  • Hydrogen-based membrane biofilm reactor, Selenate, Nitrate, Mathematical modelling, Model calibration

ID: 162341308