Model and Simulation of a HTS Generator under transient response

Victor Manuel Rodriguez Zermeno, Asger Bech Abrahamsen, Nenad Mijatovic, Bogi Bech Jensen, Mads Peter Sørensen

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

Abstract

Use of HTS field windings in electrical rotating machines can increase the torque density by a factor of 2-3 compared to conventional designs. This is highly attractive for large scale applications, such as
ship propulsion and wind turbines. However, design considerations have to take into account hysteresis losses in the HTS materials during transients. Modeling and simulation of these transients is a very
challenging task. It requires considering a system that spans spatially 6 orders of magnitude: from the μm thick superconducting layers in the windings, to a few meters in diameter and length of the MW
class machines. In this work, we present a bottom-up model of a 10MW HTS slotless generator for a direct drive wind turbine application. The model is used to simulate the transient response of the generator where focus is placed on the losses associated with ramp-up of HTS coils with different rise times and transient responses. Hence, transient hysteresis losses in the superconducting coils were
computed. This allowed addressing several important design and performance issues such as defining the safety margin of the load line to the critical current of the superconducting coils, electric load
change rate, cryostat design and identification of quench-prone regions.
Original languageEnglish
Title of host publicationConference program book - 2012 Applied Superconductivity Conference (ASC 2012)
Publication date2012
Pages746-746
Publication statusPublished - 2012
Event 2012 Applied Superconductivity Conference - Oregon Convention Center, Portland, OR, United States
Duration: 7 Oct 201212 Oct 2012

Conference

Conference 2012 Applied Superconductivity Conference
LocationOregon Convention Center
CountryUnited States
CityPortland, OR
Period07/10/201212/10/2012

Cite this

Rodriguez Zermeno, V. M., Abrahamsen, A. B., Mijatovic, N., Jensen, B. B., & Sørensen, M. P. (2012). Model and Simulation of a HTS Generator under transient response. In Conference program book - 2012 Applied Superconductivity Conference (ASC 2012) (pp. 746-746)
Rodriguez Zermeno, Victor Manuel ; Abrahamsen, Asger Bech ; Mijatovic, Nenad ; Jensen, Bogi Bech ; Sørensen, Mads Peter. / Model and Simulation of a HTS Generator under transient response. Conference program book - 2012 Applied Superconductivity Conference (ASC 2012). 2012. pp. 746-746
@inbook{5593e2602e5948ef84305aafb8e9d281,
title = "Model and Simulation of a HTS Generator under transient response",
abstract = "Use of HTS field windings in electrical rotating machines can increase the torque density by a factor of 2-3 compared to conventional designs. This is highly attractive for large scale applications, such asship propulsion and wind turbines. However, design considerations have to take into account hysteresis losses in the HTS materials during transients. Modeling and simulation of these transients is a verychallenging task. It requires considering a system that spans spatially 6 orders of magnitude: from the μm thick superconducting layers in the windings, to a few meters in diameter and length of the MWclass machines. In this work, we present a bottom-up model of a 10MW HTS slotless generator for a direct drive wind turbine application. The model is used to simulate the transient response of the generator where focus is placed on the losses associated with ramp-up of HTS coils with different rise times and transient responses. Hence, transient hysteresis losses in the superconducting coils werecomputed. This allowed addressing several important design and performance issues such as defining the safety margin of the load line to the critical current of the superconducting coils, electric loadchange rate, cryostat design and identification of quench-prone regions.",
author = "{Rodriguez Zermeno}, {Victor Manuel} and Abrahamsen, {Asger Bech} and Nenad Mijatovic and Jensen, {Bogi Bech} and S{\o}rensen, {Mads Peter}",
year = "2012",
language = "English",
pages = "746--746",
booktitle = "Conference program book - 2012 Applied Superconductivity Conference (ASC 2012)",

}

Rodriguez Zermeno, VM, Abrahamsen, AB, Mijatovic, N, Jensen, BB & Sørensen, MP 2012, Model and Simulation of a HTS Generator under transient response. in Conference program book - 2012 Applied Superconductivity Conference (ASC 2012). pp. 746-746, 2012 Applied Superconductivity Conference, Portland, OR, United States, 07/10/2012.

Model and Simulation of a HTS Generator under transient response. / Rodriguez Zermeno, Victor Manuel ; Abrahamsen, Asger Bech; Mijatovic, Nenad; Jensen, Bogi Bech; Sørensen, Mads Peter.

Conference program book - 2012 Applied Superconductivity Conference (ASC 2012). 2012. p. 746-746.

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsResearchpeer-review

TY - ABST

T1 - Model and Simulation of a HTS Generator under transient response

AU - Rodriguez Zermeno, Victor Manuel

AU - Abrahamsen, Asger Bech

AU - Mijatovic, Nenad

AU - Jensen, Bogi Bech

AU - Sørensen, Mads Peter

PY - 2012

Y1 - 2012

N2 - Use of HTS field windings in electrical rotating machines can increase the torque density by a factor of 2-3 compared to conventional designs. This is highly attractive for large scale applications, such asship propulsion and wind turbines. However, design considerations have to take into account hysteresis losses in the HTS materials during transients. Modeling and simulation of these transients is a verychallenging task. It requires considering a system that spans spatially 6 orders of magnitude: from the μm thick superconducting layers in the windings, to a few meters in diameter and length of the MWclass machines. In this work, we present a bottom-up model of a 10MW HTS slotless generator for a direct drive wind turbine application. The model is used to simulate the transient response of the generator where focus is placed on the losses associated with ramp-up of HTS coils with different rise times and transient responses. Hence, transient hysteresis losses in the superconducting coils werecomputed. This allowed addressing several important design and performance issues such as defining the safety margin of the load line to the critical current of the superconducting coils, electric loadchange rate, cryostat design and identification of quench-prone regions.

AB - Use of HTS field windings in electrical rotating machines can increase the torque density by a factor of 2-3 compared to conventional designs. This is highly attractive for large scale applications, such asship propulsion and wind turbines. However, design considerations have to take into account hysteresis losses in the HTS materials during transients. Modeling and simulation of these transients is a verychallenging task. It requires considering a system that spans spatially 6 orders of magnitude: from the μm thick superconducting layers in the windings, to a few meters in diameter and length of the MWclass machines. In this work, we present a bottom-up model of a 10MW HTS slotless generator for a direct drive wind turbine application. The model is used to simulate the transient response of the generator where focus is placed on the losses associated with ramp-up of HTS coils with different rise times and transient responses. Hence, transient hysteresis losses in the superconducting coils werecomputed. This allowed addressing several important design and performance issues such as defining the safety margin of the load line to the critical current of the superconducting coils, electric loadchange rate, cryostat design and identification of quench-prone regions.

M3 - Conference abstract in proceedings

SP - 746

EP - 746

BT - Conference program book - 2012 Applied Superconductivity Conference (ASC 2012)

ER -

Rodriguez Zermeno VM, Abrahamsen AB, Mijatovic N, Jensen BB, Sørensen MP. Model and Simulation of a HTS Generator under transient response. In Conference program book - 2012 Applied Superconductivity Conference (ASC 2012). 2012. p. 746-746