MM97.48 Influence of multidirectional deformation mode on flow stress behaviour during cold forming

Maria Lindegren, Huml Pavel, Camus Luis Mendoza

    Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

    Abstract

    In the present experimental investigation the influence of strain path on behaviour and final properties has been simulated in uni-, two- and three-directional deformation regimes. Pure iron and a low carbon steel have been investigated considering stress strain behaviour. Brass and copper specimens which have been undergoing alternate cyclic deformations have been evaluated by hardness measurements, grain size estimation and TEM.
    Original languageEnglish
    Title of host publicationProceedings of BAMFAC97
    Place of PublicationWarsaw
    PublisherWarsaw University of Technology
    Publication date1997
    Publication statusPublished - 1997
    EventBAMFAC Baltic Sea Metal Forming and Cutting Seminar - Warsaw, Poland
    Duration: 5 May 1997 → …

    Conference

    ConferenceBAMFAC Baltic Sea Metal Forming and Cutting Seminar
    CountryPoland
    CityWarsaw
    Period05/05/1997 → …

    Cite this

    Lindegren, M., Pavel, H., & Mendoza, C. L. (1997). MM97.48 Influence of multidirectional deformation mode on flow stress behaviour during cold forming. In Proceedings of BAMFAC97 Warsaw University of Technology.