Abstract
Abstract Martensitic nodular cast irons (MNCIs) with different graphite sizes and number densities are produced through continuous casting and cyclic heat treatments to refine their microstructures and to obtain a hardness of 60 HRC, and their rolling contact fatigue (RCF) properties, fractography, and subsurface microstructures have been investigated in the present study. RCF tests show that the RCF life is mainly determined by the applied Hertzian stress. Based on the calculation of characteristic parameter size and the analysis of stress concentration factor, it is found that the lower nodularity rate of graphite brings about the larger stress concentration at matrix-graphite interfaces. This stress concentration induces a debonding of the matrix and graphite, cracks, deformation, and carbon redistribution in a local volume, which results in the formation of a white etching area. The present study indicates that MNCIs are a potential material for lubricant-free bearings after chemical homogenization, microstructure refinement, and hardness enhancement.
| Original language | English |
|---|---|
| Journal | Fatigue and Fracture of Engineering Materials and Structures |
| Volume | 46 |
| Issue number | 8 |
| Pages (from-to) | 2966-2981 |
| ISSN | 8756-758X |
| DOIs | |
| Publication status | Published - 2023 |
Keywords
- Graphite
- Hertzian stress
- Martensitic nodular cast iron
- Rolling contact fatigue
- White etching area