Methods and devices used to measure friction in rolling

J. Jeswiet, Mogens Arentoft, Poul Henningsen

    Research output: Contribution to journalJournal articleResearchpeer-review

    Abstract

    Friction at the workpiece-die boundary, in both bulk forming and sheet forming is, arguably, the single most important physical parameter influencing the processing of metals; yet it remains the least understood. Hence there is a need for basic research into metal-die interface mechanisms. To gain a good understanding of the mechanisms at the interface and to be able to verify the friction and tribology models that exist, friction sensors are needed. Designing sensors to measure frictional stress in metal working has been pursued by many researchers. This paper surveys methods that have been used to measure friction in rolling in the past and discusses some of the recent sensor designs that can now be used to measure friction both in production situations and for research purposes.
    Original languageEnglish
    JournalProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
    Volume220
    Issue number1
    Pages (from-to)49-57
    ISSN0954-4054
    Publication statusPublished - 2006

    Keywords

    • sensors
    • rolling
    • friction

    Fingerprint Dive into the research topics of 'Methods and devices used to measure friction in rolling'. Together they form a unique fingerprint.

    Cite this