Skip to main navigation Skip to search Skip to main content

Measuring cohesive law of wood adhesive bonds for engineering of timber joints and products

  • Swedish University of Agricultural Sciences
  • Lund University
  • Uppsala University

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Abstract

Accurate prediction of crack growth and strength in glued timber joints and components can be achieved by using cohesive laws in constitutive models. These laws represent the traction-separation relationship that measures the stress transmitted between crack faces in a cohesive zone, and can be obtained directly from experiments. However, studies on measuring the cohesive laws of wood adhesive bonds are scarce, not standardised, and not commonly used in practice. This work aims to implement the “J-integral approach” for determining the mode I cohesive law of wood adhesive bonds directly from experiments. The investigation used Double Cantilever Beam (DCB) specimens subjected to pure bending moments, with lignin-adhesive, PVAc-adhesive, and beech wood as the test materials. For lignin-adhesive bonded wood, fracture resistance values were notably low (20-60 J/m2), accompanied by small peak stress values (0.8 MPa) and end openings (0.03 mm). Fracture propagation exhibited some instability after crack initiation. The cohesive laws for PVAc-adhesive bonded wood were more consistent, with peak stress values ranging from 1-3 MPa, end openings between 0.1-0.3 mm, and fracture resistance reaching up to 1000 J/m2. PVAc specimens with release film side grooves proved to be most suitable for characterising the bond line fracture behavior of this ductile, strong adhesive. For beech wood, specimens with side grooves exhibited more stable fracture propagation and more reasonable values for peak stress (5 MPa) and fracture energy release rates (360 J/m2). In conclusion, the J-integral approach demonstrates its potential as a valuable method for determining cohesive laws in wood and wood adhesive bonds. However, further development is necessary to improve specimen geometry, preparation, and loading procedures to enhance the reliability of fracture characterisation for all three materials investigated.
Original languageEnglish
Title of host publicationProceedings From the 14th World Conference on Timber Engineering: Advancing Timber for the Future Built Environment, WCTE 2025
PublisherCurran Associates Inc.
Publication date2025
Pages1687-1696
ISBN (Electronic)9798331320904
DOIs
Publication statusPublished - 2025
Event14th World Conference on Timber Engineering: Advancing Timber for the Future Built Environment - Brisbane, Australia
Duration: 22 Jun 2025 → 26 Jun 2025

Conference

Conference14th World Conference on Timber Engineering
Country/TerritoryAustralia
CityBrisbane
Period22/06/2025 → 26/06/2025

Keywords

  • European beech (Fagus sylvatica)
  • R-curves
  • Double cantilever beam (DCB) test
  • J-integral
  • Non-linear fracture mechanics

Fingerprint

Dive into the research topics of 'Measuring cohesive law of wood adhesive bonds for engineering of timber joints and products'. Together they form a unique fingerprint.

Cite this