Measurement based analysis of active and reactive power losses in a distribution network with wind farms and CHPs

Torsten Lund

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearch

145 Downloads (Pure)

Abstract

The paper presents an investigation of the active and reactive power losses in a distribution network with wind turbines and combined heat and power plants. The investigation is based on 15 min average power measurements and load flow calculations in the power system simulation tool PowerFactory®. Based on the measurements and simulations, a regressive model for calculation and allocation of active and reactive power losses has been derived. The influence of the covariance between load and production on the system losses is investigated separately.
Original languageEnglish
Title of host publicationOnline proceedings
Publication date2007
Publication statusPublished - 2007
Event2007 European Wind Energy Conference and Exhibition - Milan, Italy
Duration: 7 May 200710 May 2007

Conference

Conference2007 European Wind Energy Conference and Exhibition
CountryItaly
CityMilan
Period07/05/200710/05/2007

Cite this