Manufacturing of anode supported SOFCs: Processing parameters and their influence

Severine Ramousse; Mohan Menon; Karen Brodersen; Jesper Knudsen; Uffe Rahbek; Peter Halvor Larsen

doi:10.1149/1.2729107

Manufacturing of anode supported SOFCs: Processing parameters and their influence

Severine Ramousse, Mohan Menon, Karen Brodersen, Jesper Knudsen, Uffe Rahbek, Peter Halvor Larsen

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Abstract

The establishment of low cost, highly reliable and reproducible manufacturing processes has been focused for commercialization of SOFC technology. A major challenge in the production chain is the manufacture of anode-supported planar SOFC's single cells in which each layer in a layered structure contains a complex microstructure. In order to improve the cell performance as well as reducing the processing costs, it has been found necessary to consider the process chain holistically, because successful manufacture of such a cell and the achievement of optimal final properties depend on each of the processing steps and their interdependence. A large database for several thousand anode-supported SOFCs manufactured annually at the Risoe National Laboratory in collaboration with Topsoe Fuel Cell A/S has been constructed. This enables a statistical analysis of the various controlling parameters. Some critical manufacturing elements are discussed along with their impact on product quality.

Original language	English
Title of host publication	Proceedings of the International symposium on solid oxide fuel cells
Editors	K. Eguchi, S.C. Singhal, H. Yokokawa, J. Mizusaki
Volume	Pt. 1
Place of Publication	Pennington, NJ
Publisher	The Electrochemical Society
Publication date	2007
Pages	317-327
ISBN (Print)	978-1-56677-554-0
DOIs	https://doi.org/10.1149/1.2729107
Publication status	Published - 2007
Event	10th International symposium on solid oxide fuel cells - Nara New Public Hall, Nara, Japan Duration: 3 Jun 2007 → 8 Jun 2007 Conference number: 10

Conference

Conference	10th International symposium on solid oxide fuel cells
Number	10
Location	Nara New Public Hall
Country/Territory	Japan
City	Nara
Period	03/06/2007 → 08/06/2007

Series	E C S Transactions
Number	1
Volume	2007-07
ISSN	1938-5862

Access to Document

10.1149/1.2729107

OpenUrl availability

Full text

Cite this

Ramousse, S., Menon, M., Brodersen, K., Knudsen, J., Rahbek, U., & Larsen, P. H. (2007). Manufacturing of anode supported SOFCs: Processing parameters and their influence. In K. Eguchi, S. C. Singhal, H. Yokokawa, & J. Mizusaki (Eds.), Proceedings of the International symposium on solid oxide fuel cells (Vol. Pt. 1, pp. 317-327). The Electrochemical Society. https://doi.org/10.1149/1.2729107

Ramousse, Severine ; Menon, Mohan ; Brodersen, Karen et al. / Manufacturing of anode supported SOFCs: Processing parameters and their influence. Proceedings of the International symposium on solid oxide fuel cells. editor / K. Eguchi ; S.C. Singhal ; H. Yokokawa ; J. Mizusaki. Vol. Pt. 1 Pennington, NJ : The Electrochemical Society, 2007. pp. 317-327 (E C S Transactions; No. 1, Vol. 2007-07).

@inproceedings{2e2a569119834bc8b75019a673dd61ac,

title = "Manufacturing of anode supported SOFCs: Processing parameters and their influence",

abstract = "The establishment of low cost, highly reliable and reproducible manufacturing processes has been focused for commercialization of SOFC technology. A major challenge in the production chain is the manufacture of anode-supported planar SOFC's single cells in which each layer in a layered structure contains a complex microstructure. In order to improve the cell performance as well as reducing the processing costs, it has been found necessary to consider the process chain holistically, because successful manufacture of such a cell and the achievement of optimal final properties depend on each of the processing steps and their interdependence. A large database for several thousand anode-supported SOFCs manufactured annually at the Risoe National Laboratory in collaboration with Topsoe Fuel Cell A/S has been constructed. This enables a statistical analysis of the various controlling parameters. Some critical manufacturing elements are discussed along with their impact on product quality.",

keywords = "Br{\ae}ndselsceller, Brint",

author = "Severine Ramousse and Mohan Menon and Karen Brodersen and Jesper Knudsen and Uffe Rahbek and Larsen, {Peter Halvor}",

year = "2007",

doi = "10.1149/1.2729107",

language = "English",

isbn = "978-1-56677-554-0",

volume = "Pt. 1",

series = "E C S Transactions",

publisher = "The Electrochemical Society",

number = "1",

pages = "317--327",

editor = "K. Eguchi and S.C. Singhal and H. Yokokawa and J. Mizusaki",

booktitle = "Proceedings of the International symposium on solid oxide fuel cells",

note = "10th International symposium on solid oxide fuel cells, SOFC X ; Conference date: 03-06-2007 Through 08-06-2007",

}

Ramousse, S, Menon, M, Brodersen, K, Knudsen, J, Rahbek, U & Larsen, PH 2007, Manufacturing of anode supported SOFCs: Processing parameters and their influence. in K Eguchi, SC Singhal, H Yokokawa & J Mizusaki (eds), Proceedings of the International symposium on solid oxide fuel cells. vol. Pt. 1, The Electrochemical Society, Pennington, NJ, E C S Transactions, no. 1, vol. 2007-07, pp. 317-327, 10th International symposium on solid oxide fuel cells, Nara, Japan, 03/06/2007. https://doi.org/10.1149/1.2729107

Manufacturing of anode supported SOFCs: Processing parameters and their influence. / Ramousse, Severine; Menon, Mohan; Brodersen, Karen et al.
Proceedings of the International symposium on solid oxide fuel cells. ed. / K. Eguchi; S.C. Singhal; H. Yokokawa; J. Mizusaki. Vol. Pt. 1 Pennington, NJ: The Electrochemical Society, 2007. p. 317-327 (E C S Transactions; No. 1, Vol. 2007-07).

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

TY - GEN

T1 - Manufacturing of anode supported SOFCs: Processing parameters and their influence

AU - Ramousse, Severine

AU - Menon, Mohan

AU - Brodersen, Karen

AU - Knudsen, Jesper

AU - Rahbek, Uffe

AU - Larsen, Peter Halvor

N1 - Conference code: 10

PY - 2007

Y1 - 2007

N2 - The establishment of low cost, highly reliable and reproducible manufacturing processes has been focused for commercialization of SOFC technology. A major challenge in the production chain is the manufacture of anode-supported planar SOFC's single cells in which each layer in a layered structure contains a complex microstructure. In order to improve the cell performance as well as reducing the processing costs, it has been found necessary to consider the process chain holistically, because successful manufacture of such a cell and the achievement of optimal final properties depend on each of the processing steps and their interdependence. A large database for several thousand anode-supported SOFCs manufactured annually at the Risoe National Laboratory in collaboration with Topsoe Fuel Cell A/S has been constructed. This enables a statistical analysis of the various controlling parameters. Some critical manufacturing elements are discussed along with their impact on product quality.

AB - The establishment of low cost, highly reliable and reproducible manufacturing processes has been focused for commercialization of SOFC technology. A major challenge in the production chain is the manufacture of anode-supported planar SOFC's single cells in which each layer in a layered structure contains a complex microstructure. In order to improve the cell performance as well as reducing the processing costs, it has been found necessary to consider the process chain holistically, because successful manufacture of such a cell and the achievement of optimal final properties depend on each of the processing steps and their interdependence. A large database for several thousand anode-supported SOFCs manufactured annually at the Risoe National Laboratory in collaboration with Topsoe Fuel Cell A/S has been constructed. This enables a statistical analysis of the various controlling parameters. Some critical manufacturing elements are discussed along with their impact on product quality.

KW - Brændselsceller

KW - Brint

U2 - 10.1149/1.2729107

DO - 10.1149/1.2729107

M3 - Article in proceedings

SN - 978-1-56677-554-0

VL - Pt. 1

T3 - E C S Transactions

SP - 317

EP - 327

BT - Proceedings of the International symposium on solid oxide fuel cells

A2 - Eguchi, K.

A2 - Singhal, S.C.

A2 - Yokokawa, H.

A2 - Mizusaki, J.

PB - The Electrochemical Society

CY - Pennington, NJ

T2 - 10th International symposium on solid oxide fuel cells

Y2 - 3 June 2007 through 8 June 2007

ER -

Ramousse S, Menon M, Brodersen K, Knudsen J, Rahbek U, Larsen PH. Manufacturing of anode supported SOFCs: Processing parameters and their influence. In Eguchi K, Singhal SC, Yokokawa H, Mizusaki J, editors, Proceedings of the International symposium on solid oxide fuel cells. Vol. Pt. 1. Pennington, NJ: The Electrochemical Society. 2007. p. 317-327. (E C S Transactions; No. 1, Vol. 2007-07). doi: 10.1149/1.2729107

Manufacturing of anode supported SOFCs: Processing parameters and their influence

Abstract

Conference

Access to Document

OpenUrl availability

Fingerprint

Cite this