TY - JOUR
T1 - Lifecycle of Pd Clusters
T2 - Following the Formation and Evolution of Active Pd Clusters on Ceria During CO Oxidation by In Situ/Operando Characterization Techniques
AU - Gashnikova, Daria
AU - Maurer, Florian
AU - Bauer, Miriam R.
AU - Bernart, Sarah
AU - Jelic, Jelena
AU - Lützen, Mads
AU - Maliakkal, Carina B.
AU - Dolcet, Paolo
AU - Studt, Felix
AU - Kübel, Christian
AU - Damsgaard, Christian D.
AU - Casapu, Maria
AU - Grunwaldt, Jan Dierk
N1 - Publisher Copyright:
© 2024 The Authors. Published by American Chemical Society.
PY - 2024
Y1 - 2024
N2 - For maximizing the atomic efficiency in noble metal-based catalysts, dedicated preparation routes and high lifetime are essential. Both aspects require an in-depth understanding of the fate of noble metal atoms under reaction conditions. For this purpose, we used a combination of complementary in situ/operando characterization techniques to follow the lifecycle of the Pd sites in a 0.5% Pd/5% CeO2-Al2O3 catalyst during oxygen-rich CO oxidation. Time-resolved X-ray absorption spectroscopy showed that Pd cluster formation under reaction conditions is important for a high CO oxidation activity. In combination with density functional theory calculations, we concluded that the ideal Pd cluster size amounts to about 10-30 Pd atoms. The cluster formation and stability were affected by the applied temperature and reaction conditions. Already short pulses of 1000 ppm CO in the lean reaction feed were found to trigger sintering of Pd at temperatures below 200 °C, while at higher temperatures oxidation processes prevailed. Environmental transmission electron microscopy unraveled redispersion at higher temperatures (400-500 °C) in oxygen atmosphere, leading to the formation of single sites and thus the loss of activity. However, due to the reductive nature of CO, clusters formed again upon cooling in reaction atmosphere, thus closing the catalytic cycle. Exploiting the gained knowledge on the lifecycle of Pd clusters, we systematically investigated the effect of catalyst composition on the cluster formation tendency. As uncovered by DRIFTS measurements, the Pd to CeO2 ratio seems to be a key descriptor for Pd agglomeration under reaction conditions. While for higher Pd loadings, the probability of cluster formation increased, a higher CeO2 content leads to the formation of oxidized dispersed Pd species. According to our results, a Pd:CeO2 weight ratio of 1:10 for CeO2-Al2O3-supported catalysts leads to the highest CO oxidation activity under lean conditions independent of the applied synthesis method.
AB - For maximizing the atomic efficiency in noble metal-based catalysts, dedicated preparation routes and high lifetime are essential. Both aspects require an in-depth understanding of the fate of noble metal atoms under reaction conditions. For this purpose, we used a combination of complementary in situ/operando characterization techniques to follow the lifecycle of the Pd sites in a 0.5% Pd/5% CeO2-Al2O3 catalyst during oxygen-rich CO oxidation. Time-resolved X-ray absorption spectroscopy showed that Pd cluster formation under reaction conditions is important for a high CO oxidation activity. In combination with density functional theory calculations, we concluded that the ideal Pd cluster size amounts to about 10-30 Pd atoms. The cluster formation and stability were affected by the applied temperature and reaction conditions. Already short pulses of 1000 ppm CO in the lean reaction feed were found to trigger sintering of Pd at temperatures below 200 °C, while at higher temperatures oxidation processes prevailed. Environmental transmission electron microscopy unraveled redispersion at higher temperatures (400-500 °C) in oxygen atmosphere, leading to the formation of single sites and thus the loss of activity. However, due to the reductive nature of CO, clusters formed again upon cooling in reaction atmosphere, thus closing the catalytic cycle. Exploiting the gained knowledge on the lifecycle of Pd clusters, we systematically investigated the effect of catalyst composition on the cluster formation tendency. As uncovered by DRIFTS measurements, the Pd to CeO2 ratio seems to be a key descriptor for Pd agglomeration under reaction conditions. While for higher Pd loadings, the probability of cluster formation increased, a higher CeO2 content leads to the formation of oxidized dispersed Pd species. According to our results, a Pd:CeO2 weight ratio of 1:10 for CeO2-Al2O3-supported catalysts leads to the highest CO oxidation activity under lean conditions independent of the applied synthesis method.
KW - Catalytic lifecycle
KW - Cluster formation
KW - CO oxidation
KW - In situ/operando characterization
KW - Palladium−ceria
U2 - 10.1021/acscatal.4c02077
DO - 10.1021/acscatal.4c02077
M3 - Journal article
AN - SCOPUS:85205732332
SN - 2155-5435
VL - 14
SP - 14871
EP - 14886
JO - ACS Catalysis
JF - ACS Catalysis
IS - 19
ER -