Intensity Noise Transfer Through a Diode-pumped Titanium Sapphire Laser System

Research output: Contribution to journalJournal article – Annual report year: 2017Researchpeer-review

Documents

DOI

View graph of relations

In this paper, we investigate the noise performance and transfer in a titanium sapphire (Ti:S) laser system. This system consists of a DBR tapered diode laser, which is frequency doubled in two cascaded nonlinear crystals and used to pump the Ti:S laser oscillator. This investigation includes electrical noise characterizations of the utilized power supplies, the optical noise of the fundamental light, the second harmonic light, and finally the optical noise of the femtosecond pulses emitted by the Ti:S laser. Noise features originating from the electric power supply are evident throughout the whole transfer chain. It is demonstrated that improving the electrical noise provides an easy method for reducing the relative intensity noise (RIN) in all stages. The frequency doubled light is shown to have a higher RIN than the fundamental light. In particular, the cascaded system is seen to exhibit higher RIN than a setup with only a single nonlinear crystal. The Ti:S is shown to have a cut-off frequency around 500 kHz, which means that noise structures of the pump laser above this frequency are strongly suppressed. Finally, the majority of the Ti:S noise seems to originate from the laser itself, which partly can be explained by the effect of relaxation oscillation frequency.
Original languageEnglish
Article number1700209
JournalIEEE Journal of Quantum Electronics
Volume54
Issue number1
Number of pages9
ISSN0018-9197
DOIs
Publication statusPublished - 2018
CitationsWeb of Science® Times Cited: No match on DOI

    Research areas

  • Laser noise, Noise measurement, Nonlinear optics, Laser cavity resonators

Download statistics

No data available

ID: 140458625