Integration of micro milling highspeed spindle on a microEDM-milling machine set-up

Arnaud De Grave; Hans Nørgaard Hansen; Loic Andolfatto

Integration of micro milling highspeed spindle on a microEDM-milling machine set-up

Arnaud De Grave, Hans Nørgaard Hansen, Loic Andolfatto

École normale supérieure Paris-Saclay

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Abstract

In order to cope with repositioning errors and to combine the fast removal rate of micro milling with the precision and small feature size achievable with micro EDM milling, a hybrid micro-milling and micro-EDM milling centre was built and tested. The aim was to build an affordable set-up, easy to use and adapt to an existing device, not to build a complete new machine. The design requirements will be presented and the set-up described. A geometrical model of the set-up following the small displacement torsor concept is proposed and verified by comparing a simulated and manufactured pocket done by micro milling. Examples of test parts are shown and used as an experimental validation.

Original language	English
Title of host publication	Proceedings of the Global Conference on Micro Manufacture, 4M/ICOMM 2009
Publication date	2009
Pages	355-358
Publication status	Published - 2009
Event	International Conference on Multi-Material Micro-Manufacture(4M) and the International Conference on Micro-Manufacture (ICOMM) - Karlsruhe, Germany Duration: 23 Sept 2009 → 25 Sept 2009 Conference number: 5th http://www.4m-association.org/conference/2009

Conference

Conference	International Conference on Multi-Material Micro-Manufacture(4M) and the International Conference on Micro-Manufacture (ICOMM)
Number	5th
Country/Territory	Germany
City	Karlsruhe
Period	23/09/2009 → 25/09/2009
Internet address	http://www.4m-association.org/conference/2009

Keywords

micro milling

OpenUrl availability

Full text

Cite this

@inproceedings{04636f2b503e45c092107a7445c15ad7,

title = "Integration of micro milling highspeed spindle on a microEDM-milling machine set-up",

abstract = "In order to cope with repositioning errors and to combine the fast removal rate of micro milling with the precision and small feature size achievable with micro EDM milling, a hybrid micro-milling and micro-EDM milling centre was built and tested. The aim was to build an affordable set-up, easy to use and adapt to an existing device, not to build a complete new machine. The design requirements will be presented and the set-up described. A geometrical model of the set-up following the small displacement torsor concept is proposed and verified by comparing a simulated and manufactured pocket done by micro milling. Examples of test parts are shown and used as an experimental validation.",

keywords = "micro milling",

author = "{De Grave}, Arnaud and Hansen, {Hans N{\o}rgaard} and Loic Andolfatto",

year = "2009",

language = "English",

pages = "355--358",

booktitle = "Proceedings of the Global Conference on Micro Manufacture, 4M/ICOMM 2009",

note = "International Conference on Multi-Material Micro-Manufacture(4M) and the International Conference on Micro-Manufacture (ICOMM), 4M/ICOMM 2009 ; Conference date: 23-09-2009 Through 25-09-2009",

url = "http://www.4m-association.org/conference/2009",

}

De Grave, A, Hansen, HN & Andolfatto, L 2009, Integration of micro milling highspeed spindle on a microEDM-milling machine set-up. in Proceedings of the Global Conference on Micro Manufacture, 4M/ICOMM 2009. pp. 355-358, International Conference on Multi-Material Micro-Manufacture(4M) and the International Conference on Micro-Manufacture (ICOMM), Karlsruhe, Germany, 23/09/2009.

TY - GEN

T1 - Integration of micro milling highspeed spindle on a microEDM-milling machine set-up

AU - De Grave, Arnaud

AU - Hansen, Hans Nørgaard

AU - Andolfatto, Loic

N1 - Conference code: 5th

PY - 2009

Y1 - 2009

N2 - In order to cope with repositioning errors and to combine the fast removal rate of micro milling with the precision and small feature size achievable with micro EDM milling, a hybrid micro-milling and micro-EDM milling centre was built and tested. The aim was to build an affordable set-up, easy to use and adapt to an existing device, not to build a complete new machine. The design requirements will be presented and the set-up described. A geometrical model of the set-up following the small displacement torsor concept is proposed and verified by comparing a simulated and manufactured pocket done by micro milling. Examples of test parts are shown and used as an experimental validation.

AB - In order to cope with repositioning errors and to combine the fast removal rate of micro milling with the precision and small feature size achievable with micro EDM milling, a hybrid micro-milling and micro-EDM milling centre was built and tested. The aim was to build an affordable set-up, easy to use and adapt to an existing device, not to build a complete new machine. The design requirements will be presented and the set-up described. A geometrical model of the set-up following the small displacement torsor concept is proposed and verified by comparing a simulated and manufactured pocket done by micro milling. Examples of test parts are shown and used as an experimental validation.

KW - micro milling

M3 - Article in proceedings

SP - 355

EP - 358

BT - Proceedings of the Global Conference on Micro Manufacture, 4M/ICOMM 2009

T2 - International Conference on Multi-Material Micro-Manufacture(4M) and the International Conference on Micro-Manufacture (ICOMM)

Y2 - 23 September 2009 through 25 September 2009

ER -

Integration of micro milling highspeed spindle on a microEDM-milling machine set-up

Abstract

Conference

Keywords

OpenUrl availability

Fingerprint

Cite this