Integration of conducting polymer network in non-conductive polymer substrates

Thomas Steen Hansen, Keld West, Ole Hassager, Niels Bent Larsen

Research output: Contribution to journalJournal articleResearchpeer-review

Abstract

Anew method for integration ofconjugated, inherently conducting polymers into non-conductive polymer substrates has been developed. Alayer of the conducting polymer is polymerised by chemical oxidation, e.g. using Fe(ID) p-toluene sulfonate (ferri tosylate) followed by washing with a solvent which simultaneously removes residual and spent oxidant and at the same time dissolves the top layer of the polymer substrate. This results in an integration of the conducting polymer into the surface layers of the polymer substrate. Several combinations of conducting polymers and substrates have been tested, with particular focus on poly(3,4-ethylenedioxythiophene) (PEDOT) on PMMA substrates. The structural, electrical and mechanical properties of this system has been characterised by atomic force microscopy, conductance measurements, and tribological tests. Furthermore, measurement ofconductivity and optical absorption during sequential reactive ion etching has allowed for analysis of the PEDOT distribution within the surface layer of thePMMA substrate. The surface resistance ofthe conducting polymer layer remains low while the surface layer at the same time adapts some of the mechanical properties of the substrate, resulting in a highly conducting surface with very good wear resistance.
Original languageEnglish
JournalSynthetic Metals
Volume156
Issue number18-20
Pages (from-to)1203-1207
ISSN0379-6779
DOIs
Publication statusPublished - 2006

Keywords

  • surface resistance
  • topography
  • poly(3,4-ethylenedioxythiophene)
  • mechanical stability
  • polymer integration

Fingerprint

Dive into the research topics of 'Integration of conducting polymer network in non-conductive polymer substrates'. Together they form a unique fingerprint.

Cite this