Integrating Electrochemical Detection with Centrifugal Microfluidics for Real-Time and Fully Automated Sample Testing

Sune Zoëga Andreasen, Dorota Kwasny, Letizia Amato, Anna Line Brøgger, Filippo Bosco, Karsten Brandt Andersen, Winnie Edith Svendsen, Anja Boisen

    Research output: Contribution to journalJournal articleResearchpeer-review

    322 Downloads (Pure)

    Abstract

    Here we present a robust, stable and low-noise experimental set-up for performing electrochemical detection on a centrifugal microfluidic platform. By using a low-noise electronic component (electrical slip-ring) it is possible to achieve continuous, on-line monitoring of electrochemical experiments, even when the microfluidic disc is spinning at high velocities. Automated sample handling is achieved by designing a microfluidic system to release analyte sequentially, utilizing on-disc passive valving. In addition, the microfluidic system is designed to trap and keep the liquid sample stationary during analysis. In this way it is possible to perform cyclic voltammetry (CV) measurements at varying spin speeds, without altering the electrochemical response. This greatly simplifies the interpretation and quantification of data. Finally, real-time and continuous monitoring of an entire electrochemical experiment, including all intermediate sample handling steps, is demonstrated by amperometric detection of on-disc mixing of analytes (PBS and ferricyanide).
    Original languageEnglish
    JournalR S C Advances
    Volume5
    Pages (from-to)17187–17193
    ISSN2046-2069
    DOIs
    Publication statusPublished - 2015

    Cite this