Integrated Design and Control of Reactive and Non-Reactive Distillation Processes

Seyed Soheil Mansouri, Mauricio Sales-Cruz, Jakob Kjøbsted Huusom, Rafiqul Gani

Research output: Contribution to conferenceConference abstract for conferenceResearchpeer-review

150 Downloads (Pure)

Abstract

Process design and process control have been considered as independent problems for many years. In this context, a sequential approach is used where the process is designed first, followed by the control design. However, this sequential approach has its limitations related to dynamic constraint violations, for example, infeasible operating points, process overdesign or under-performance. Therefore, by using this approach, a robust performance is not always guaranteed. Furthermore, process design decisions can influence process control and operation (Huusom, 2015). To overcome these limitations, an alternative approach is to tackle process design and controllability issues simultaneously, in the early stages of process design. This simultaneous synthesis approach provides optimal/near optimal operation and more efficient control of conventional (non-reactive binary distillation columns) (Hamid et al., 2010) as well as complex chemical processes; for example, intensified processes such as reactive distillation (Mansouri et al., 2015). Most importantly, it identifies and eliminates potentially promising design alternatives that may have controllability problems later. To date, a number of methodologies have been proposed and applied on various problems to address the interactions between process design and control, and they range from optimization-based approaches to model-based methods (Sharifzadeh, 2013).
In this work, integrated design and control of non-reactive distillation, ternary compound reactive distillation and multi-component reactive distillation processes is considered systematically through a computer-aided framework. To assure that design decisions give the optimum operational and economic performance, operability and controllability issues are considered simultaneously with the process design issues. Operability issues are addressed to ensure a stable and reliable process design at pre-defined operational conditions whereas controllability is considered to maintain desired operating points of the process at any kind of imposed disturbance under normal operating conditions. First, to design non-reactive binary distillation columns, a set of conventional and simple design methods such as McCabe-Thiele and driving force approach (Bek-Pedersen and Gani, 2004) are selected. Next, these design methods are extended using element concept to also include ternary as well as multicomponent reactive distillation processes. The element concept (Pérez Cisneros et al., 1997) is used to translate a ternary system of compounds (A + B ↔ C) to a binary system of element (WA and WB). In the case of multicomponent reactive distillation processes the equivalent element concept is used to translate a multicomponent (multi-element) system (Jantharasuk et al., 2011) of compounds (A + B ↔ C + D(inert)) to a binary system of key elements (elements WHK and WLK). For an energy-efficient design, non-reactive driving force (for binary non-reactive distillation), reactive driving force (for ternary compound reactive distillation) and binary-equivalent driving force (for multicomponent reactive distillation) were employed. For both the McCabe-Thiele and driving force method, vapor-liquid equilibrium data are based on elements (except for binary non-reactive distillation column). ICAS-PDS is used to compute the reactive vapor-liquid equilibrium data set by consecutive calculation of reactive bubble points. It has been shown previously that designing a reactive distillation column at the maximum driving force will result in the minimum energy consumption (Bek-Pedersen and Gani, 2004). Note, that the same principles that apply to a binary non-reactive compound system are valid also for a binary-element or a binary-key-element system. Therefore, it is advantageous to employ the element based method for multicomponent reaction-separation systems.
The operation of the non-reactive distillation column, ternary reactive distillation column (binary-element) and multicomponent reactive distillation column (binary-key-element) is investigated at the highest driving force and other candidate points. It is shown analytically and through rigorous dynamic process simulation (using ICAS process simulation software and Aspen Plus) for all three cases that the sensitivity of the system to the disturbances in the feed at the highest driving force is less than any other candidate point. By application of this approach, it is shown that designing the non-reactive and reactive distillation processes at the maximum driving force results in an optimal design in terms of controllability and operability as well as an optimal/near optimal design from an energy point of view. It is verified that the reactive distillation design option is less sensitive to the disturbances in the feed at the highest driving force and has the inherent ability to reject disturbances.
Original languageEnglish
Publication date2015
Number of pages1
Publication statusPublished - 2015
Event2015 AIChE Annual Meeting - Salt Palace Convention Center, Salt Lake City, United States
Duration: 8 Nov 201513 Nov 2015
http://www.aiche.org/conferences/aiche-annual-meeting/2015

Conference

Conference2015 AIChE Annual Meeting
LocationSalt Palace Convention Center
CountryUnited States
CitySalt Lake City
Period08/11/201513/11/2015
Internet address

Cite this

Mansouri, S. S., Sales-Cruz, M., Huusom, J. K., & Gani, R. (2015). Integrated Design and Control of Reactive and Non-Reactive Distillation Processes. Abstract from 2015 AIChE Annual Meeting, Salt Lake City, United States.