In-Situ XRD during Electrochemical CO Reduction on Cu

Research output: Contribution to journalConference abstract in journal – Annual report year: 2018Researchpeer-review

View graph of relations

Almost all-successful CO2 and CO reduction catalysts to higher chain carbons are based on copper1, however various facets and pre-treatments of copper have shown to give a wide variety of product selectivity.2,3 Currently there are many unanswered questions regarding active sites and mechanisms thus fundamental studies are essential for this reaction. This talk will focus on in-situ monitoring the copper-copper oxide crystal structure at a variety of oxidative and reductive potentials. Using the synchrotron facilities at the SLAC national laboratory we were able to achieve an in-depth understand both of how deep the native oxide layer penetrates and how this oxide becomes reduced as we shift towards more cathodic potentials. This talk was also discuss under what conditions there is an amorphous copper oxide layer and what conditions lead to a crystalline copper oxide surface. This will be followed by a discussion of how the copper oxide effects the crystal structure of the metallic copper at the operating conditions.
Original languageEnglish
Article number1612
JournalElectrochemical Society. Meeting Abstracts (Online)
VolumeMA2018-01
Issue number28
ISSN2151-2043
Publication statusPublished - 2018
Event233rd ECS Meeting - Seattle, United States
Duration: 13 May 201817 May 2018
Conference number: 233

Conference

Conference233rd ECS Meeting
Number233
CountryUnited States
CitySeattle
Period13/05/201817/05/2018

ID: 148521342