Abstract
Injection moulding is characterized by high precision requirements. In particular, the demands regarding the mould plates
alignment are in order of few micro meters. This research introduces a methodology to measure the misalignment in injection
moulding. Eddy current sensors are used in the system to perform measurements for a whole cycle. In a long run of the mould, a
comparison of mould deviation between the first and the last cycles is obtained.
alignment are in order of few micro meters. This research introduces a methodology to measure the misalignment in injection
moulding. Eddy current sensors are used in the system to perform measurements for a whole cycle. In a long run of the mould, a
comparison of mould deviation between the first and the last cycles is obtained.
| Original language | English |
|---|---|
| Title of host publication | Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology |
| Number of pages | 2 |
| Publisher | The European Society for Precision Engineering and Nanotechnology |
| Publication date | 2017 |
| ISBN (Electronic) | 978-0-9957751-0-7 |
| Publication status | Published - 2017 |
| Event | euspen’s 17th International Conference & Exhibition - Hannover Congress Centre, Hannover, Germany Duration: 29 May 2017 → 2 Jun 2017 |
Conference
| Conference | euspen’s 17th International Conference & Exhibition |
|---|---|
| Location | Hannover Congress Centre |
| Country/Territory | Germany |
| City | Hannover |
| Period | 29/05/2017 → 02/06/2017 |
Keywords
- Injection moulding
- Centering
- Misalignment
- Displacement sensors
- Guiding system