Injection moulding and selective metallisation technologies for polymer Microsystems

L. Tenchine; S. Gout; S.  Dessors; S. Azcarate; Guido Tosello; Matteo Calaon; N.  Miller; B.  Brown; C.  Edouard; T. Müller; W.  Wittner; M. Prantl; Xiaobang  Shang; Afif  Batal

doi:10.3850/978-981-11-0749-8 688

Injection moulding and selective metallisation technologies for polymer Microsystems

L. Tenchine
, S. Gout
, S. Dessors
, S. Azcarate
, Guido Tosello
, Matteo Calaon
, N. Miller
, B. Brown
, C. Edouard
, T. Müller
, W. Wittner
, M. Prantl
, Xiaobang Shang
, Afif Batal

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

634 Downloads (Orbit)

Abstract

The present paper describes how developing and optimizing high-throughput integrated technologies for theproduction of miniaturised multi-material and multi-functional components at industrial scale. Based on 2 industrialdemonstrators (a band diplexer and a micro aeraulic device), the paper shows that many technologies have to becombined to succeed: injection moulding process, copper plating, laser ablation, laser welding, glue welding...

Original language	English
Title of host publication	Proceedings of the 11th International Conference on Multi-Material Micro Manufacture (4M2016) : co-organised with 10th International Workshop on Microfactories (IWMF2016)
Publisher	Research Publishing Services
Publication date	2016
Pages	19-22
ISBN (Print)	978-981-11-0749-8
DOIs	https://doi.org/10.3850/978-981-11-0749-8 688
Publication status	Published - 2016
Event	4M/IWMF 2016 Conference - Technical University of Copenhagen, Kgs. Lyngby, Denmark Duration: 13 Sept 2016 → 15 Sept 2016 http://www.4m-association.org/

Conference

Conference	4M/IWMF 2016 Conference
Location	Technical University of Copenhagen
Country/Territory	Denmark
City	Kgs. Lyngby
Period	13/09/2016 → 15/09/2016
Internet address	http://www.4m-association.org/

Keywords

Microsystem
Plating
LDS
MEMS
Injection moulding
Laser

Access to Document

10.3850/978-981-11-0749-8 688

Injection moulding and selective metallisation technologies for polymer MEMSFinal published version, 146 KB

OpenUrl availability

Full text

Cite this

Tenchine, L., Gout, S., Dessors, S., Azcarate, S., Tosello, G., Calaon, M., Miller, N., Brown, B., Edouard, C., Müller, T., Wittner, W., Prantl, M., Shang, X., & Batal, A. (2016). Injection moulding and selective metallisation technologies for polymer Microsystems. In Proceedings of the 11th International Conference on Multi-Material Micro Manufacture (4M2016) : co-organised with 10th International Workshop on Microfactories (IWMF2016) (pp. 19-22). Research Publishing Services. https://doi.org/10.3850/978-981-11-0749-8 688

@inproceedings{14eb85704ac64399a8373a71efb1bbc3,

title = "Injection moulding and selective metallisation technologies for polymer Microsystems",

abstract = "The present paper describes how developing and optimizing high-throughput integrated technologies for theproduction of miniaturised multi-material and multi-functional components at industrial scale. Based on 2 industrialdemonstrators (a band diplexer and a micro aeraulic device), the paper shows that many technologies have to becombined to succeed: injection moulding process, copper plating, laser ablation, laser welding, glue welding...",

keywords = "Microsystem, Plating, LDS, MEMS, Injection moulding, Laser",

author = "L. Tenchine and S. Gout and S. Dessors and S. Azcarate and Guido Tosello and Matteo Calaon and N. Miller and B. Brown and C. Edouard and T. M{\"u}ller and W. Wittner and M. Prantl and Xiaobang Shang and Afif Batal",

year = "2016",

doi = "10.3850/978-981-11-0749-8 688",

language = "English",

isbn = "978-981-11-0749-8",

pages = "19--22",

booktitle = "Proceedings of the 11th International Conference on Multi-Material Micro Manufacture (4M2016) : co-organised with 10th International Workshop on Microfactories (IWMF2016)",

publisher = "Research Publishing Services",

note = "4M/IWMF 2016 Conference ; Conference date: 13-09-2016 Through 15-09-2016",

url = "http://www.4m-association.org/",

}

Tenchine, L, Gout, S, Dessors, S, Azcarate, S, Tosello, G , Calaon, M, Miller, N, Brown, B, Edouard, C, Müller, T, Wittner, W, Prantl, M, Shang, X & Batal, A 2016, Injection moulding and selective metallisation technologies for polymer Microsystems. in Proceedings of the 11th International Conference on Multi-Material Micro Manufacture (4M2016) : co-organised with 10th International Workshop on Microfactories (IWMF2016). Research Publishing Services, pp. 19-22, 4M/IWMF 2016 Conference, Kgs. Lyngby, Denmark, 13/09/2016. https://doi.org/10.3850/978-981-11-0749-8 688

Injection moulding and selective metallisation technologies for polymer Microsystems. / Tenchine, L.; Gout, S.; Dessors, S. et al.
Proceedings of the 11th International Conference on Multi-Material Micro Manufacture (4M2016) : co-organised with 10th International Workshop on Microfactories (IWMF2016). Research Publishing Services, 2016. p. 19-22.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

TY - GEN

T1 - Injection moulding and selective metallisation technologies for polymer Microsystems

AU - Tenchine, L.

AU - Gout, S.

AU - Dessors, S.

AU - Azcarate, S.

AU - Tosello, Guido

AU - Calaon, Matteo

AU - Miller, N.

AU - Brown, B.

AU - Edouard, C.

AU - Müller, T.

AU - Wittner, W.

AU - Prantl, M.

AU - Shang, Xiaobang

AU - Batal, Afif

PY - 2016

Y1 - 2016

N2 - The present paper describes how developing and optimizing high-throughput integrated technologies for theproduction of miniaturised multi-material and multi-functional components at industrial scale. Based on 2 industrialdemonstrators (a band diplexer and a micro aeraulic device), the paper shows that many technologies have to becombined to succeed: injection moulding process, copper plating, laser ablation, laser welding, glue welding...

AB - The present paper describes how developing and optimizing high-throughput integrated technologies for theproduction of miniaturised multi-material and multi-functional components at industrial scale. Based on 2 industrialdemonstrators (a band diplexer and a micro aeraulic device), the paper shows that many technologies have to becombined to succeed: injection moulding process, copper plating, laser ablation, laser welding, glue welding...

KW - Microsystem

KW - Plating

KW - LDS

KW - MEMS

KW - Injection moulding

KW - Laser

U2 - 10.3850/978-981-11-0749-8 688

DO - 10.3850/978-981-11-0749-8 688

M3 - Article in proceedings

SN - 978-981-11-0749-8

SP - 19

EP - 22

BT - Proceedings of the 11th International Conference on Multi-Material Micro Manufacture (4M2016) : co-organised with 10th International Workshop on Microfactories (IWMF2016)

PB - Research Publishing Services

T2 - 4M/IWMF 2016 Conference

Y2 - 13 September 2016 through 15 September 2016

ER -

Tenchine L, Gout S, Dessors S, Azcarate S, Tosello G , Calaon M et al. Injection moulding and selective metallisation technologies for polymer Microsystems. In Proceedings of the 11th International Conference on Multi-Material Micro Manufacture (4M2016) : co-organised with 10th International Workshop on Microfactories (IWMF2016). Research Publishing Services. 2016. p. 19-22 doi: 10.3850/978-981-11-0749-8 688

Injection moulding and selective metallisation technologies for polymer Microsystems

Abstract

Conference

Keywords

Access to Document

OpenUrl availability

Fingerprint

Cite this